VAN CÔNG NGHIỆP PHÚC MINH - THẾ GIỚI VAN CÔNG NGHIỆP
VAN CÔNG NGHIỆP PHÚC MINH - THẾ GIỚI VAN CÔNG NGHIỆP
HOTLINE: +84902800728
Tìm thấy tất cả những gì bạn cần về van công nghiệp

VAN AN TOÀN KUNKLE - Kunkle Safety and Relief Valves

VAN AN TOÀN KUNKLE  - Kunkle Safety and Relief Valves

Khối lượng: 20 kg
1.000.000 đ
Số lượng

 
 



 
Kunkle Models 1 and 2
Brass Safety Valves, ASME Section VIII, Air/Gas or Steam, 'UV' National Board Certified
.
Models 1 and 2 Brass Safety Valves
ASME Section VIII, Air/Gas or Steam, 'UV' National Board Certified

Model Descriptions
Model 1 - Top Outlet 
Model 2 - Side Outlet

Pressure and Temperature Limits 

5 to 250 psig -60° to 406°F
Kunkle Models 19, 19M, 20, 20M, 20MP, 200A, 200H
Non-code Bronze Liquid Relief Valves.
 
 

Models 19, 19M, 20, 20M, 20MP, 200A, 200H
Non-code Bronze Liquid Relief Valves

Model Descriptions
  • Model 19: All bronze, equipped with handwheel for easy adjustment.
  • Model 19M: Same as Model 19 except SS trim (seat and disc). (Available 2 1/2-inch and 3-inch only). For higher pressure settings or severe applications.
  • Model 20: All bronze, with pressure-tight cap. Suitable for maximum back pressure of 50 psig.
  • Model 20M: Same as Model 20 except SS trim (available in 2 1/2-inch and 3-inch only)(seat and disc). For higher pressure settings or severe applications. Maximum back pressure of 50 psig.
  • Model 20P: Same as Model 20 except with packed lift lever. Suitable for maximum back pressure of 50 psig.
  • Model 20MP: Same as Model 20M except with packed lift lever. Maximum back pressure of 50 psig.
  • Model 200A: Special non-chattering design. Recommended for light oils and continuous bypass or pressure regulation. UL listed for light oil service. Available 3/4-inch through 1 1/2-inch sizes. Female NPT connections only.
  • Model 200H: Same as Model 20. UL listed for use with fuel oils. Available 3/4-inch through 2-inch sizes.
 
Kunkle Model 30
ASME Section VIII Air/Gas, 'UV', National Board Certified Safety Valves
.
 
 
Model 30
ASME Section VIII Air/Gas, 'UV', National Board Certified Safety valves

Model Descriptions 
Model 30: Brass, Top Venting

Pressure and Temperature Limits 
60 to 4000 psig -20° to 300°F

Applications
  •  Small to medium size, multi-stage, air compressors, intercoolers, aftercoolers, instrument/control air lines and systems
  • Air tanks/receivers and pressurized equipment
Kunkle Models 40R, 40RL
Non-code Steam Service, Sentinel Relief Valves.
 
 
Models 40R, 40RL
Non-code Steam Service, Sentinel Relief Valves

Model Descriptions 
Model 40R: 1/2-inch or 3/4-inch male NPT inlet with top discharge to give visible warning of system overpressure. 
Model 40RL: Same as Model 40R with plain lift lever.

Note: For other valves suitable for sentinel (warning) service, see Model 1 and Models 264, 265
Pressure and Temperature Limits 
1 to 400 psig -60° to 850°F

Applications
  • Sentinel (warning) on steam equipment. Intended as audible warning device, not for pressure relief.
  • Steam turbines.
Options 
No Options Available

Features and Benefits
  • All parts are Stainless Steel
  • Precision lapped beveled seats for optimum performance.
  • Pivot between spring and disc corrects misalignment and compensates for spring side thrust.
Kunkle Models 71S, 171, 171P, 171S
Liquid Relief Valves
Models 71S, 171, 171P, 171S
Liquid Relief Valves

Model Descriptions 
Model 71S: Cast iron body with SS seat and disc. Pressure-tight hood.
Model 171: CS and SS seat and disc. Pressure-tight hood.
Model 171P: Same as 171 with packed lift lever.
Model 171S: All 316 SS construction including spring. Pressure-tight hood.
Model 171S Variation 02: Same as 171S with packed lift lever.

Pressure and Temperature Limits 
Models 71S: 1 to 250 psig -20o to 406oF
Models 171, 171P, 171S, 171SP: 1 to 400 psig -20o to 406o

Applications 
Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
Acid, caustic, ammonia and other corrosive liquids requiring iron, steel or Stainless Steel materials.
Pressure regulation.
By-pass relief.
All 316 Stainless Steel Model 171S suitable for sanitary/edible applications.

Options 
SS springs.

Features and Benefits 
Suitable for back pressure to 50 psig.
Seats lapped for optimum performance.
Ball bearing pivot between disc and spring corrects misalignment and compensates for spring side thrust.

 
Kunkle Models 91, 218, 228
Cast Iron Liquid Relief Valves
Models 91, 218, 228
Cast Iron Liquid Relief Valves

Model Descriptions
  • Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60 psig.
  • Model 218: Bronze trim, UL and FM approved for fire pump installations. Special design offers minimum set pressure of 60 psig. Easily adjustable with handwheelto 200 psig (175 psig with optional 125# inlet flange).
  • Model 228: Bronze trim, with pressure-tight cap. UL and FM approved for fire pump installations. Suitable for maximum back pressure of 60 psig.
Pressure and Temperature Limits
  • Model 91: 5 to 400 psig -20° to 406°F
  • Models 218, 228: 60 to 200 psig -20° to 406°F
Furnished standard with ANSI rated B16.1 - 250# inlet flange and ANSI B16.1 - 125# outlet flange.
Applications
  • Fire Pump Service, UL and FM approved. (Models 218, 228)
  • Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
  • Pressure regulating.
Options
  • SS trim. (insert and disc) (Variation 02)
  • Female x Female NPT connections. (1 1/2-inch through 4-inch sizes)
  • Inlet and outlet flanges per ANSI B16.34, 1-inch - 125#. Limited to 175 psig maximum set pressure.
Features and Benefits
  • Bolted bonnet permits easy inspection and servicing without removal from system.
  • Quality cast iron body and bonnet, insert and disc are available in either bronze or Stainless Steel and lapped for optimum performance.
  • Springs are steel with plating for corrosion protection.
  • High lift, wing-guided disc offers high relieving capacity. Pivot between disc and spring corrects misalignment and compensates for spring side thrust.
Kunkle Model 140
Stainless Steel Liquid Safety Relief Valves
 
 
Model 140
Stainless Steel Liquid Safety Relief Valves

Model Descriptions 
Model 140: Stainless Steel, Side Outlet.

Pressure and Temperature Limits 
10 to 300 psig -60° to 406°F

Applications 
A general utility valve of all SS construction, including spring, for liquid

Options 
No Options Available

Features and Benefits
  • Compact design requires minimum installation space.
  • Angle lapped seat provides tight shut-off.
Kunkle Models 189, 363, 389
ASME Section VIII, Air/Gas Cryogenic, 'UV' National Board Certified Safety Valves
.
Models 189, 363, 389
ASME Section VIII, Air/Gas Cryogenic, 'UV' National Board Certified Safety Valves

Model Descriptions
  • Model 189: Bronze housing with SS trim (nozzle and disc) with Teflon seat/seal in disc. Plain lift lever.
  • Model 189C: Same as Model 189 except pressure tight cap for gas service only. Suitable for maximum back pressure of 50 psig.
  • Model 189P: Same as Model 189 except pressure tight packed lift lever. Suitable for maximum back pressure of 50 psig.
  • Model 363: Bronze housing with SS trim (nozzle and disc) with Teflon seat/seal in disc. Plain lift lever. 1000 psig maximum set pressure.
  • Model 363C: Same as Model 363 except pressure tight cap for gas service only. Suitable for maximum back pressure of 50 psig. 1000 psig maximum set pressure.
  • Model 363P: Same as Model 363 except pressure tight cap for gas service only. Suitable for maximum back pressure of 50 psig. 1000 psig maximum set pressure.
  • Model 389C: All SS with Teflon seat/seal in disc. Pressure tight cap for gas service only. Suitable for a maximum back pressure of 50 psig.
  • Model 389P: Same as Model 389C except pressure tight packed lift lever. Suitable for maximum back pressure of 50 psig.
Pressure and Temperature Limits
  • Model 363: 50 to 1000 psig -320° to 350°F
  • Model 189: 1000 to 2500 psig -320° to 350° F
  • Model 389: 50 to 2500 psig -320° to 350°F
Applications
  • Cryogenic 'cold' and liquefied air, oxygen and gas service.
  • Multi-stage air and gas compressors, intercoolers, aftercoolers and receivers.
  • Thermal expansion relief and/or full rated capacity discharge.
  • Air, gas and liquefied gas lines and systems.
Options 
No Options Available

Features and Benefits
  • Unique three-piece disc assembly (with Teflon seat/seal) offers superior 'leak-free' performance over the entire pressure/temperature operating range.
  • Control ring offers precise adjustment of blowdown.
  • Pivot betwee disc and spring corrects for all misalignment and compensates for spring side thrust.
  • Every valve 100% tested/inspected for set pressure, blowdown and leakage.
  • All adjustments are factory sealed to prevent tampering and disassembly.
 
Kunkle Models 215V, 337
ASME Section VIII, Air/Gas Vacuum, 'UV' National Board Certified Safety Valves
Models 215V, 337
ASME Section VIII, Air/Gas Vacuum, 'UV' National Board Certified Safety Valves.

Model Descriptions
  • Model 337: Has 'pull-ring' lift device for easy manual testing.
  • Model 215V: Model used for Vacuum service.
Pressure and Temperature Limits
  • Model 337: 1 to 60 psig -20° to 406°F
  • Model 215V: 2-inch HG to 29-inch HG -20° to 400°F
Applications
  • Protection of low to medium pressure high volume blowers, compressors and pneumatic conveying systems.
  • Bulk hauling trailers/equipment.
  • Light gauge tanks.
  • Protection of high volume vacuum pumps and conveying systems.
Options 
SS trim. (nozzle and disc) (Variation 03)

Features and Benefits
  • Large nozzle design provides high capacity.
  • Flat bronze valve seats are lapped for optimum performance.
  • Warn ring offers easy adjustablility for precise opening with minimum pre-open or simmer and exact blowdown control.
  • Pivot between disc and spring corrects misalignment and compensates for spring side thrust.
Kunkle Models 230, 330, 330S, 333S
Relief Valves, ASME Section VIII, Gas, 'UV' National Board Certified
Models 230, 330, 330S, 333S - Relief Valves
ASME Section VIII, Gas, 'UV' National Board Certified

Model Descriptions
  • Model 230: 1/4-inch Male NPT - 300/1500 psig.
  • Model 330: 1/4-inch Male NPT - 1000/5500 psig. Aluminum housing, SS trim (seat and disc with synthetic insert). Sidewall discharge.
  • Model 330S: Same as Model 330 except SS body suitable for 2000/6500 psig.
  • Model 333S: Same as 330S except 1/2-inch Female NPT side outlet. Pressure-tight cap.
Pressure and Temperature Limits
  • Model 230: 300 to 1500 psig -20° to 185°F
  • Model 330: 1000 to 5500 psig -20° to 185°F
  • Model 330S: 2000 to 6500 psig -20° to 185°F
  • Model 333S: 2000 to 6500 psig -20° to 185°F
Applications
  • Multi-stage high pressure compressors, intercoolers and aftercoolers.
  • High pressure receivers and storage bottles.
  • Thermal expansion relief.
Options 
No Options Available

Features and Benefits
  • Lightweight aluminum construction. Resistant to environmental and internal corrosion.
  • Aluminum parts are anodized for corrosion resistance.
  • Model 230 is direct spring-loaded design with synthetic disc insert.
  • Model 330 series incorporates a differential mechanism which maintains a predetermined seat-contact load.
  • The full spring load is never imparted to synthetic disc insert (models 330, 330S, and 333S only).
  • Seat tightness increases to a maximum as inlet pressure approaches the opening pressure.
Kunkle Models 264, 265, 266, 267, 264P, 265P, 266P, 267P
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified
Models 264, 265, 266, 267, 264P, 265P, 266P, 267P
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified.

Model Descriptions
  • Model 264: CS housing with 316 SS trim (nozzle and disc), SS spring. Pressure-tight cap.
  • Model 265: Same as Model 264 except high-temperature alloy spring.
  • Model 266: Same as Model 264 except all 316 SS materials.
  • Model 267: Same as Model 266 except high-temperature alloy spring.
  • Model 264P: Same as Model 264 with pressure-tight packed lift lever.
  • Model 265P: Same as Model 265 with pressure-tight packed lift lever.
  • Model 266P: Same as Model 266 with pressure-tight packed lift lever.
  • Model 267P: Same as Model 267 with pressure tight packed lift lever.
Pressure and Temperature Limits
  • Models 264, 266: 4 to 3300 psig -20° to 550°F
  • Models 265, 267: 4 to 3300 psig -20° to 750°F
  • Maximum back pressure 400 psig.
Applications
  • Protection of pumps, compressors, pressure vessels or systems handling corrosive fluids or vapors at high pressure and/or temperature.
  • Sentinel (warning) on steam equipment.
Options 
No Options Available

Features and Benefits
  • Top-guided design offers high capacity with .110 in 2 orifice area.
  • Ball bearing pivot between disc and spring corrects misalignment and compensates for spring side thrust.
  • Every valve 100% tested/inspected for pressure setting and leakage.
  • Standard outlet with 1-inch Female NPT.
  • Available with soft seats
Kunkle Model 299
Drip Pan Elbow
.
Model 299 - Drip Pan Elbow
Drip Pan Elbow

Model Descriptions
  • Model 0299-H: Used for Safety valve outlet size of 2-inch.
  • Model 0299-J: Used for Safety valve outlet size of 2 1/2-inch.
  • Model 0299-K: Used for Safety valve outlet size of 3-inch.
  • Model 0299-M: Used for Safety valve outlet size of 4-inch.
  • Model 0299-P: Used for Safety valve outlet size of 6-inch.
  • Model 0299-Q: Used for Safety valve outlet size of 8-inch.
Pressure and Temperature Limits 
Not Applicable

Applications 
Install drip pan on outlet/discharge pipe for safety valves in steam service

Options 
No Options Available

Features and Benefits 
Provides a means to handle condensate from safety valves used in steam applications

 
Kunkle Models 300, 600
ASME Section I Steam and ASME Section VIII Air/Gas/Steam
.
Models 300, 600
ASME Section I Steam and ASME Section VIII Air/Gas/Steam

Model Descriptions
  • Model 300: Cast steel, exposed spring, full nozzle with SS trim. ANSI 300# inlet flange and 150# outlet flange.
  • Model 600: Cast steel, exposed spring, full nozzle with SS trim. ANSI 600# inlet flange and 150# outlet flange.
Pressure and Temperature Limits
  • Models 300: 15 to 410 psig @ 800 o F, 505 psig @ 750 o F, -20 o F minimum temperature
  • Models 600: 15 to 825 psig @ 800 o F, 1000 psig @750 o F, -20 o F minimum temperature
Applications
  • Steam Boilers and Generators
  • Pressure Reducing Stations
  • Air/Gas Compressors - reciprocating or rotary.
  • Pressure Vessels - including tanks, receivers, intercoolers, oil/gas separators, lines.
Options 
High Temperature Alloy Spring

Features and Benefits
  • Heavy duty construction of high quality cast steel with Stainless Steel full-nozzle trim for optimum performance.
  • Bolted yoke design for easy maintenance.
  • Steel yoke incorporates a cover-shield for guiding surfaces and provides for fully exposed spring.
  • Seats lapped to optical flatness for tight shut-off
  • Dual control rings offer easy adjustability for precision opening with minimum pre-open or simmer and exact blowdown control.
  • Every valve 100% tested/inspected for pressure setting, blowdown and leakage.
  • All adjustments are factory sealed to prevent tampering or disassembly.
Kunkle Model 537
ASME Section IV, Low Pressure Hot Water Boilers, 'HV', National Board Certified
Model 537
ASME Section IV, Low Pressure Hot Water Boilers, 'HV', National Board Certified

Model Descriptions 
Model 537: Bronze for 3/4-inch and 1-inch models, Cast iron for 1-1/2-inch and 2-inch models.

Pressure and Temperature Limits 
15 to 160 psig -20°F to 250°F

Applications 
Hot water boiler, heat exchangers and generators.

Options 
No Options Available

Features and Benefits
  • Extra heavy construction provides long life.
  • Top guided disc assembly incorporates resilient seal in seating area.
  • An isolating diaphragm protects working parts from corrosion caused by discharged liquid
  • Pivot between disc and spring corrects for misalignment and compensates for spring side thrust.
  • These safety relief valves serve the dual purpose of relieving (1) over pressure created by thermal expansion under normal 'on and off' firing conditions and (2) over pressure in the form of water or steam created in over-firing due to failure of electrical or other controls. 
Kunkle Models 541, 542, 548
ASME Section VIII, Brass, Air/Gas, 'UV', National Board Certified
Models 541, 542, 548
ASME Section VIII, Brass, Air/Gas, 'UV', National Board Certified

Model Descriptions 
Model 541: 1/4-inch or 1/2-inch Male NPT inlet. Brass body and seat with BUNA-N ball seal.
Model 542: Same as Model 541 except Viton Ball seal.
Model 548: Same as Model 541 except SS ball seal.

Pressure and Temperature Limits 
Model 541: 3 to 200 psig -40oF to 200oF
Model 542: 3 to 200 psig -10oF to 300oF
Model 548: 3 to 400 psig -60oF to 300oF

Applications 
Small to medium size, single and multistage, air compressors, intercoolers,aftercoolers, instrument/control air lines and systems
Air tanks/receivers and pressurized equipment.

Options 
No Options Available

Features and Benefits 
High capacity with small size.
Every valve is 100% tested/inspected for pressure setting and leakage
Factory sealed to prevent tampering or disassembly.

 
Kunkle Models 803, 818
Non-code Air/Gas Relief Valves
.
 
 
Models 803, 818
Non-code Air/Gas Relief Valves

Model Descriptions
  • Model 803: Aluminum.
  • Model 818: Carbon Steel.
Pressure and Temperature Limits
  • Model 803: 1000 to 6000 psig -20°F to 185°F
  • Model 818: 120 to 150 psig -20°F to 300°F
Applications
  • Small to medium size, single and multistage, air compressors, intercoolers, after coolers, instrument/control air lines and systems.
  • Air tanks/receivers and pressurized equipment.
Options 
No Options Available

Features and Benefits
  • Every valve is 100% tested/inspected for pressure setting and leakage.
  • Factory sealed to prevent tampering or disassembly.
Kunkle Models 910, 911, 916, 917, 920, 921, 927
ASME Section VIII, Air/Gas/Steam/Liquid, 'UV' national Board Certified. Also available for vacuum service
Models 910, 911, 916, 917, 920, 921, 927
ASME Section VIII, Air/Gas/Steam/Liquid, 'UV' national Board Certified. Also available for vacuum service.

Model Descriptions
  • Model 910: CS body and bonnet with SS trim.
  • Model 911: All SS construction.
  • Model 916: Same as Model 910 except resilient seat/seals. Superior 'leak-free' performance.
  • Model 917: Same as Model 911 except resilient seat/seals. Superior 'leak-free' performance.
  • Model 920: Steel body and bonnet with screwed cap and stainless steel spring for organic fluid vaporizers (ASME Section I - 'V' Special Use or application). 1,400 psig maximum set pressure.
  • Model 921: Steel body and bonnet with plain lift lever and stainless steel spring for forced flow steam generators (ASME Section I - 'V' Special Use or application). 1,400 psig maximum set pressure.
  • Model 927: Steel body and bonnet with packed lift lever and SS spring for high temperature/pressure hot water boilers (ASME Section I - 'V' Special Use or application). 1,400 psig maximum set pressure.
Pressure and Temperature Limits 
See Catalog PDF for Pressure and Temperature Limits

Applications
  • Air/gas compressors, intercoolers, aftercoolers
  • Liquid filled pressure vessels/systems, ASME Section VIII (UV).
  • Pressure vessels - containing gas, air, liquid or steam, including tanks and receivers.
  • Vacuum systems including pumps, tanks and equipment.
  • Oil/gas separators.
  • Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
  • Bypass relief or pressure regulation.
  • All stainless steel Model 911 valves may be suitable for sanitary/edible applications.
Options
  • Threaded cap
  • Threaded cap with gag
  • Plain lever
  • Plain lever with gag
  • Plain lever with vibration dampener
  • Packed lever
  • Packed lever
  • Packed lever with gag
Features and Benefits
  • Available with soft seats.
  • Threaded cap standard (back pressure tight). Maximum back pressure 50 psig [3.4 barg].
  • Hex on valve nozzle provides for easy installation.
  • Single control ring offers easy adjustment of blowdown.
  • Pivoting disc design offers exceptional seat alignment.
  • Guide to nozzle ratio reduces friction.
  • Valve bodies are heavy duty castings.
  • Full nozzle design for optimum flow performance.
  • Threaded side outlet for piped off discharge to eliminate fugitive emissions.
   Kunkle Models 912, 913, 918, 919
ASME Section VIII, Steam/Air/Gas/Liquid, 'UV' National Board Certified. Also available for Vacuum Service



See Page 8 of link
 
 
Models 912, 913, 918, 919
ASME Section VIII, Steam/Air/Gas/Liquid, 'UV' National Board Certified. Also available for Vacuum Service.

Model Descriptions
  • Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/brass body and bonnet.
  • Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
  • Model 918: Same as Model 912 except resilient seat/seal. Superior 'leak-free' performance.
  • Model 919: Same as Model 913 except resilient seat/seals. Superior 'leak-free' performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).
Pressure and Temperature Limits
  • Models 912, 913, 918, 919 - Steam 3 to 250 psig -60° to 406°F
  • Models 912, 918 - Air/Gas/Liquid 3 to 300 psig -60° to 406°F
  • Models 913, 919 - Air/Gas/Liquid 3 to 900 psig -60° to 406°F
  • Vacuum 6 through 29-inch HG - 300°F
  • Maximum back pressure 50 psig - threaded cap and packed lever.
Applications
  • Air/gas compressors - intercoolers - aftercoolers.
  • Liquid filled pressure vessels/systems - ASME Section VIII (UV)
  • Pressure vessels - containing gas, air, liquid or steam. Including tanks and receivers.
  • Vacuum systems including pumps, tanks and equipment.
  • Optional materials for low temperature - cryogenic applications
  • Oil/gas separators.
  • Overpressure relief and protection of pumps, tanks, lines, and hydraulic systems.
  • By-pass relief or pressure regulation.
Options
  • Threaded cap
  • Threaded cap with gag
  • Plain lever
  • Plain lever with gag
  • Plain lever with vibration dampener
  • Packed lever
  • Packed lever
  • Packed lever with gag
Features and Benefits
  • Available with soft seat.
  • Threaded cap is standard (back pressure tight).
  • Hex on valve nozzle provides for easy installation.
  • Single control ring offers easy adjustability of blowdown.
  • Pivoting disc design corrects misalignment and offers exceptional performance.
  • Guide to nozzle ratio reduces friction
  • Full nozzle design for optimum flow performance.
  • Threaded side outlet for piped off discharge to eliminate fugitive emissions.
Kunkle Model 930
ASME Section IV 'Steam' Standard, 'HV', National Board
Model 930
ASME Section IV 'Steam' Standard, 'HV', National Board

Model Descriptions 
Model 930: High Capacity, Cast Iron.

Pressure and Temperature Limits 
15 psig only

Applications 
Low pressure steam heating boilers ASME Code Section IV.

Options 
No Options Available

Features and Benefits
  • Extra high capacity for industrial, commercial and residential low pressure steam heating boilers.
  • Large seat area/guide area ratio, along with disc pivot design ensures optimum valve performance.
  • Lapped valve seats for optimum performance.
  • Reversible lift lever for 'pull-up' or 'pull-down' manual testing.
  • Every valve 100% tested/inspected for pressure setting and leakage.
  • All adjustments are factory sealed to prevent tampering or disassembly
Kunkle Models 6010, 6021, 6030, 6182, 6121, 6130, 6186, 6283, 6221, 6230, 6933, 6934, 6935
ASME Section I and VIII, Steam, 'V' and 'UV', ASME Section VIII, Air/Gas 'UV' National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, 'Steam', 'HV' National Board Certified
Models 6010, 6021, 6030, 6182, 6121, 6130, 6186, 6283, 6221, 6230, 6933, 6934, 6935
ASME Section I and VIII, Steam, 'V' and 'UV', ASME Section VIII, Air/Gas 'UV' National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, 'Steam', 'HV' National Board Certified.

Model Descriptions
  • Model 6010: Side outlet. Full nozzle design with brass/bronze trim. Available with O-ring seats.
  • Model 6021: Same as Model 6010 with Teflon (PFA) disc insert. (use on steam only).
  • Model 6030: Same as Model 6010 except SS trim (nozzle and disc). Available with O-ring seats.
  • Model 6182: Top outlet. Full nozzle design with bronze/brass trim. Available with O-ring seats.
  • Model 6121: Same as Model 6182 with Teflon (PFA) disc insert.
  • Model 6130: Same as Model 6182 except SS trim (nozzle and disc). O-ring seat available.
  • Model 6186: Top outlet. Full nozzle design with bronze/brass trim. 150 psig maximum set pressure. Replaces Model 86 (original equipment only).
  • Model 6283: Side outlet. Full nozzle design bronze/brass trim.
  • Model 6221: Same as Model 6283 with Teflon (PFA) disc insert. (Use on steam only).
  • Model 6230: Same as Model 6283 except SS trim (nozzle and disc).
  • Model 6933: Same as Model 6010 except certified for ASME Section IV. Low pressure steam heating boilers set at 15 psig only.
  • Model 6934: Same as Model 6021 except certified for ASME Section IV. Low pressure steam heating boilers set at 15 psig only.
  • Model 6935: Same as Model 6030 except certified for ASME Section IV. Low pressure steam heating boilers set at 15 psig only.
Pressure and Temperature Limits
Models 6010, 6021, 6182, 6283, 6221
  • Section I Steam 15 to 250 psig -60° to 406°F
  • Non-code and Section VIII Steam, Air/Gas 3 to 250 psig -60° to 406°F

Models 6030, 6130, 6230
  • Section I Steam 15 to 300 psig -60° to 425°F
  • Non-code and Section VIII Steam, Air/Gas 3 to 250 psig -60° to 406°F
Applications
  • Steam boilers and generators
  • Air/Gas compressors - reciprocating or rotary - portable or stationary, intercoolers and aftercoolers.
  • Pressure Vessels - containing steam, air or non-hazardous gas. Including tanks, receivers, sterilizers and autoclaves.
  • Pressure Reducing Stations - protection of the discharge or low pressure side of system.
Options 
Optional O-Ring Soft Seat Where Indicated

Features and Benefits
  • O-ring seats available for exceptional leak-free performance, reduced maintenance cost, multiple cycles with tight shutoff, improved seating integrity.
  • Wide hex on valve nozzle provides wrenching service clearance for easy installation.
  • Dual control rings offer easy adjustability for precise opening with minimum preopen or simmer and exact blowdown control.
  • Ball bearing pivot between disc and spring corrects misalignment and compensates for spring side thrust.
  • Grooved piston model disc reduces sliding area and friction.
Kunkle Models 6252, 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas 'UV' National Board Certified. Model 6252 ASME Section IV 'HV' National Board Certified
Models 6252, 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas 'UV' National Board Certified. Model 6252 ASME Section IV 'HV' National Board Certified.

Model Descriptions
  • Model 6252: Cast iron, enclosed spring, stainless steel trim.
  • Model 6254: Same as Model 6252 except certified for ASME Code IV - Low pressure steam heating boilers. Set at 15 psig only. J through P orifice only.
Pressure and Temperature Limits 
Model 6252: 10 to 250 psig -20° to 406°F

Applications
  • Steam Boilers and Generators.
  • Pressure Reducing Stations.
  • Air/Gas Compressors - reciprocating or rotary.
  • Pressure Vessels - including tanks, receivers, intercoolers, oil/gas separators, lines.
Options 
No Options Available

Features and Benefits
  • Heavy duty construction of high quality cast iron with SS semi-nozzle trim and disc.
  • Bolted bonnet design for easy maintenance.
  • Seats lapped to optical flatness.
  • Dual control rings offer easy adjustability for precision opening with minimum preopen or simmer and exact blowdown control.
  • Heavy duty lift lever assembly.
  • Every valve tested/inspected for pressure setting, blowdown and leakage.
  • All adjustments are factory sealed to prevent tampering or disassembly.

DANH MỤC CÁC MODEL MÃ HÀNG CỦA HẢNG VAN AN TOÀN KUNKLE VALVE
 
Kunkle 0001-C01-KC0135 1/2" 135#AirRelfVlv 174SCFM
Kunkle 0001-D01-KC0125 3/4"AirRelf 125# 167scfm VIII
Kunkle 0019-C01-MG0010 1/2" MxF 10# 3gpm
Kunkle 0019-C02-MG0030 1/2" FxF 30# W/HANDWHEEL
Kunkle 0019-D01-MG0030 3/4" MxF 30# W/HANDWHEEL
Kunkle 0019-D01-MG0300 3/4" 300# RELIEF VALVE 36gpm
Kunkle 0019-E01-MG0100 1" 100# ADJ. W/HANDWHEEL
Kunkle 0019-E01-MG0125 1" 125# ADJ. W/HANDWHEEL
Kunkle 0019-E01-MG0225 1"225#ADJ. W/HANDWHEEL
Kunkle 0019-E01-MG0300 1"300#ADJ. W/HANDWHEEL
Kunkle 0019-G01-MC0300 1.5X1.5 RELIEF VLV 300#
Kunkle 0019-G01-MG0020 1 1/2 X 1 1/2" RlfVlv 20#
Kunkle 0019-H01-MG0020 2" MxF NPT 20# SET RELIEF VLV
Kunkle 0020-C01-MG0002 1/2X3/4" 2# RELIEF VALVE
Kunkle 0020-C01-MG0015 1/2"X3/4" RELIEF VLV 15-24#
Kunkle 0020-C01-MG0030 1/2"x3/4" RELIEF VLV 30# 5gpm
Kunkle 0020-C01-MG0035 1/2"x3/4" 35# RELIEF VALVE
Kunkle 0020-C01-MG0050 1/2"X3/4" RELIEF VLV 50#
Kunkle 0020-C01-MG0175 1/2X3/4" 175# RELIEF VALVE
Kunkle 0020-C01-MG0200 1/2" x 3/4" 13gpm 200# Relief
Kunkle 0020-D01-MG0010 3/4"MxF,10# RelfVlv 7GPM
Kunkle 0020-D01-MG0045 3/4" 45# RELIEF VALVE 14GPM
Kunkle 0020-D01-MG0050 3/4"x3/4" 50#RelfVlv 15GPM
Kunkle 0020-D01-MG0060 3/4"x3/4" 60# RELIEF VLV 16GPM
Kunkle 0020-D01-MG0070 3/4" 70# RELIEF VALVE 17gpm
Kunkle 0020-D01-MG0075 3/4" 75# RELIEF VALVE 18gpm
Kunkle 0020-D01-MG0100 3/4"Mx3/4"F,100#,21GPM,RELIEF
Kunkle 0020-D01-MG0125 1/2"X3/4" 125# RELIEF VALVE
Kunkle 0020-D01-MG0130 3/4" 130# RELIEF VLV
Kunkle 0020-D01-MG0150 3/4" 150# RELIEF VALVE BRNZ
Kunkle 0020-D01-MG0165 3/4" 165# RELF VLV BRZ 26GPM
Kunkle 0020-D01-MG0170 3/4" 170# RELIEF VALVE BRNZ
Kunkle 0020-D01-MG0175 3/4" 175# RELIEF VALVE BRNZ
Kunkle 0020-D01-MG0180 3/4" 180# RELIEF VALVE BRNZ
Kunkle 0020-D01-MG0250 3/4" RELIEF SET @ 250#
Kunkle 0020-D01-MG0300 3/4"RELIEF SET@ 300# 36GPM
Kunkle 0020-D05-MG 3/4"MX3/4"F,50-150PSIG RELIEF
Kunkle 0020-D06-MG 3/4" RELIEF VLV, 100-300# ADJ
Kunkle 0020-E01-MG0030 1" RELIEF SET@ 30# 20gpm
Kunkle 0020-E01-MG0035 1"m X 1"fNPT REL VLV 35#
Kunkle 0020-E01-MG0045 1"m X 1"f NPT,316SS,45# RELIEF
Kunkle 0020-E01-MG0060 1"m X 1"f NPT,316SS,60# RELIEF
Kunkle 0020-E01-MG0075 1" RELIEF SET@ 75# 31gpm
Kunkle 0020-E01-MG0125 1" 125# RELIEF VALVE
Kunkle 0020-E01-MG0135 1" RELIEF VALVE SET@135#
Kunkle 0020-E01-MG0150 1x1 SET @ 150#
Kunkle 0020-E01-MG0175 1" Relief Valve 175# 48GPM
Kunkle 0020-E01-MG0220 1" RELIEF SET @ 220#
Kunkle 0020-E01-MG0225 1"m X 1"fNPT REL VLV 225#
Kunkle 0020-E01-MG0275 1" Relief Valve 275# 59GPM
Kunkle 0020-F01-MG0040 1 1/4" RELIEF VLV 40# 39GPM
Kunkle 0020-F01-MG0075 1 1/4"RELIEF VLV 75#, 56GPM
Kunkle 0020-F01-MG0300 1 1/4 ReliefVlv@300 psi
Kunkle 0020-G01-MG0050 1 1/2" Relief 50# 68gpm
Kunkle 0020-G01-MG0175 1 1/2" RELIEF 175#
Kunkle 0020-G01-MG0200 1 1/2" RELIEF 200#
Kunkle 0020-G01-MG0250 1 1/2" RELIEF 250# 1153gpm
Kunkle 0020-H01-MG0020 2"RELIEF 20# VLV
Kunkle 0020-H01-MG0025 2"RELIEF 25# VLV
Kunkle 0020-H01-MG0030 2X2 RELIEF VLV 30#
Kunkle 0020-H01-MG0035 2X2 RELIEF VLV 35#KU00
Kunkle 0020-H01-MG0040 2x2 SET@ 40# 119gph
Kunkle 0020-H01-MG0050 2" Relief Valve 50#
Kunkle 0020-H01-MG0100 2" RELIEF 100# VLV 187gpm
Kunkle 0020-H01-MG0125 2" RELIEF 125# 209gpm
Kunkle 0020-H01-MG0175 2" RELIEF 175# VLV
Kunkle 0020-J01-MG0035 2.5x2.5npt 35#LiquidRelf168GPM
Kunkle 0020-J01-MG0090 2.5" 90# RELF VLV 290GPM
Kunkle 0020-J01-MG0175 2.5" Relief Valve 175# 400GPM
Kunkle 0020-K01-MG0020 3" X 3" 20# RELIEF VALVE
Kunkle 0020-K01-MG0050 3"MxF 50# RELIEF VALVE
Kunkle 0020-K01-MG0125 3" X 3" 125# RELIEF VALVE
Kunkle 0020-K01-MG0135 3" RELIEF VLV SET @ 135#
Kunkle 0020P-H01-MG0160 2 X 2" 160# RELIEF VLV PACKED
Kunkle 0030-A01-KM0120 1/4" 120# AIR RELIEF
Kunkle 0030-A01-KM0250 1/4" 250# 54 SCFM AIR RELIEF
Kunkle 0030-A01-KM0400 1/4"nptReliefVlv,Air400#85scfm
Kunkle 0230-A01-NC0300 1/4", ALUMINUM, PRV, 300#
Kunkle 0266-D01-KG0350 3/4" 350# 617scfm RlfVlv
Kunkle 0299-H 2" DRIP PAN ELBOW
Kunkle 0299-J 2 1/2" X 2 1/2" DRIP PAN ELBOW
Kunkle 0299-M 4" X 4" DRIP PAN ELBOW
Kunkle 0337-H01AKE0008 2"Air Relf Vlv 8# 666SCFM
Kunkle 0337-H01AKE0015 2"Air Relf Vlv 15# 948SCFM
Kunkle 0337-H01AKE0022 2"SAFTY/RELEASE VALVE,SS,22#
Kunkle 0337-H01AKE0025 2"AIRrelfVLV, 25#,S.S
Kunkle 0337-H01AKM0020 2" RELIEF VLV SET@20
Kunkle 0337-H01AKM0025 2" RELIEF VLV SET@25
Kunkle 0337-J01AKE0015 2.5"ReliefVlv,Air,15#
Kunkle 0337-K01AKE0010 3"ReliefVlv,Air,10#,ASME VIII
Kunkle 0337-K01ANE0005 3"ReliefVlv,Air,5#,ASME VIII
Kunkle 0537-D01-HM0030 3/4"x1" 30# 1054#HR RelfVlv
Kunkle 0537-D01-HM0040 3/4" 40#STEAM RELF 1297#/HR
Kunkle 0537-D01-HM0045 3/4"x1" 45# RELF VLV
Kunkle 0537-D01-HM0050 3/4X1"50#RELIEF VLV 1541#PH
Kunkle 0537-D01-HM0060 3/4X1" 60# 1784#PH RELIEF VLV
Kunkle 0537-D01-HM0080 3/4" X 1" 80# 2269959 BTU
Kunkle 0537-D01-HM0100 3/4"X1 100#2,756,221 RELEIF VL
Kunkle 0537-D01-HM0125 3/4" X 1" 125# RELIEF VALVE
Kunkle 0537-D01-HM0160 3/4 X 1 160# RELIEF VALVE
Kunkle 0537-E01-HM0030 1"X 1 1/4" 30# Relief Valve
Kunkle 0537-E01-HM0060 1"x1 1/4" 60# Relief Valve
Kunkle 0537-E01-HM0070 1" 70# RELIEF 3,167,632BTU
Kunkle 0537-E01-HM0075 1" H20 RELIEF VLV SET@75
Kunkle 0537-E01-HM0100 1" 100# RELIEF 4,307,565BTU
Kunkle 0537-E01-HM0125 1" H20 RELIEF VLV SET@125
Kunkle 0537-E01-HM0140 1"140#5,827,476BTU H20 RELEIF
Kunkle 0537-E01-HM0150 1" H20 RELIEF VLV SET@150
Kunkle 0537-E01-HM0160 1" 160# H20 RELF VLV
Kunkle 0537-G01-HM0015 1 1/2" 15# STEAM RLF
Kunkle 0537-G01-HM0030 1.5x2" 30#SteamRelf 3495#HR
Kunkle 0537-G01-HM0035 1.5" 35# RELF VLV
Kunkle 0537-G01-HM0036 1 1/2"H2O RELIEF VLV. SET@36#
Kunkle 0537-G01-HM0040 1.5"X2" 40# RELIEF VALVE
Kunkle 0537-G01-HM0045 1.5"x2" 45# RelfVlv
Kunkle 0537-G01-HM0050 1.5"x 2" 50# 5,107,000 BTU
Kunkle 0537-G01-HM0060 1 1/2" 60# 5913#PH RELIEF VLV
Kunkle 0537-G01-HM0075 1 1/2 X 2 75# 
Kunkle 0537-G01-HM0080 1 1/2"H2O RELIEF VLV. SET 80#
Kunkle 0537-G01-HM0085 1 1/2" 85# RELIEF VALVE
Kunkle 0537-G01-HM0090 1.5"x2"ReliefSet@90 8331000Btu
Kunkle 0537-G01-HM0100 1 1/2" 100# STEAM RELIEF
Kunkle 0537-G01-HM0125 1.5"x 2" 125# Relief Valve
Kunkle 0537-G01-HM0150 1 1/2"x 2" 150# 13,167,000 BTU
Kunkle 0537-G01-HM0160 1.5fX 2"f 160# RLF 13,973,579
Kunkle 0537-H01-GE0105 2x2.5 SET @ 105#
Kunkle 0537-H01-HM0020 2" 20# RLF VLV 8,111,000 BTU
Kunkle 0537-H01-HM0030 2"H2O RELIEF VLV. SET@30#
Kunkle 0537-H01-HM0035 2"H2O RELIEF VLV. SET@35#
Kunkle 0537-H01-HM0036 2" H2O RELIEF VLV. SET@36#
Kunkle 0537-H01-HM0040 2 X 2 1/2 RLF VLV 40#
Kunkle 0537-H01-HM0045 2"X2" 45# 8,364,917btu RlfVlv
Kunkle 0537-H01-HM0050 2"X2 1/2" 9,081,537 REL VALVE
Kunkle 0537-H01-HM0060 2 X 2 1/2" 60# RELF 10,514,779
Kunkle 0537-H01-HM0065 2x2.5" SET@ 65# 11,000,000 BTU
Kunkle 0537-H01-HM0070 2x2.5" 70# 11,948,000btu
Kunkle 0537-H01-HM0075 2X2.5 RELIEF VLV 75#
Kunkle 0537-H01-HM0100 2" H20 RELIEF VLV SET AT 100#
Kunkle 0537-H01-HM0125 2" 125# RLF VLV 19,830,847 BTU
Kunkle 0537-H01-HM0130 2" H2O RLF VLV 130# 20,547,000
Kunkle 0537-H01-HM0160 2" H20 RELIEF VLV SET AT 160#
Kunkle 0541-A01-NM0003 AIR RELIEF VALVE 1/4" 3# SET
Kunkle 0548-A01-KM0020 Air Relief Valve 1/4" 20# Set
Kunkle 0548-A01-KM0025 Air Relief Valve 1/4" 25# SET
Kunkle 0548-A01-KM0030 Air Relief Valve 1/4" 30# Set
Kunkle 0548-A01-KM0040 Air Relief Valve 1/4" 40# Set
Kunkle 0548-A01-KM0060 Air Relief Valve 1/4" 60# Set
Kunkle 0548-A01-KM0070 Air Relief Valve 1/4" 70# Set
Kunkle 0548-A01-KM0075 Air Relief Valve 1/4" 75# Set
Kunkle 0548-A01-KM0100 Air Relief Valve 1/4" 100# Set
Kunkle 0548-A01-KM0125 Air Relief Valve 1/4" 125#SET
Kunkle 0548-A01-KM0150 Air Relief Valve 1/4" 150# SET
Kunkle 0548-A01-KM0200 1/4" Brnz,Relief Vlv, 200-PSI
Kunkle 0548-A01-KM0325 1/4" RELIEF VLV FACT SET@ 325#
Kunkle 0548-C01-KM0080 Air Relief Valve 1/2" 80# Set
Kunkle 0548-C01-KM0120 1/2"AirRelf 120# 295scfmSSBall
Kunkle 0548-C01-KM0125 1/2" SS BALL SEAL 125# RLF VLV
Kunkle 0548-C01-KM0300 1/2"AIR RELIEF 300#
Kunkle 0803-A01-NC1800 1/4" AIR/GAS RLF VLV 1800#
Kunkle 0803-A01-NC4500 1/4" AIR/GAS RLF VLV 4500#
Kunkle 091H-G01MS0060 1 1/2" FLG 60# RELIEF VALVE
Kunkle 091H-K01AMS0100 3" Flg. 100# 560gpm ReliefVlv
Kunkle 091H-M01AMS0100 4"flg 100#RELIEF 125#FLG
Kunkle 091K-K01AMS0030 3" FLG 30# RLF 250x125 307GPM
Kunkle 091K-M01AMS0030 4"flg 30#RLF 250X125  548GPM
Kunkle 091K-M01AMS0150 4"flg 150# RLF VLV
Kunkle 0930-H01-GC0015 2" 15# 3161#PH STEAM RELIEF
Kunkle 0930-J01-GC0015 2 1/2" 15# 4497#PH STEAM REL.
Kunkle 0930-K01-GC0015 3" 15# 6942#PH STEAM RELIEF
Kunkle 171S-D01-MG0150 3/4" SS 150# RELIEF VALVE
Kunkle 171S-E01-MG0028 1" X 1" S.S. RELIEF VALVE 28#
Kunkle 200A-D01-MG0142 RELIEF VAVLE 3/4" 142#
Kunkle 200A-E01-MG0024 1" RELIEF VALVE 24#
Kunkle 200A-G01-MG0040 RELIEF VAVLE 1 1/4" 40#
Kunkle 200A-G01-MG0200 RELIEF VALVE 1 1/4" 200#
Kunkle 200H-D01-MG0015 RELIEF VAVLE 3/4" 15# FUEL OIL
Kunkle 215V-H01AQE0015 2" VAC VALV BRONZE 15"Hg
Kunkle 215V-H01AQE0019 2" VAC VLV CI W/BRZ TR 19"hg
Kunkle 215V-H01AQE0029 2" VAC VALV BRONZE 29"HG
Kunkle 215V-K01AQE0014 3" VacRlfVlv 14"hg 936scfm
Kunkle 215V-K01AQE0015 3" VacRlfVlv 15"hg 936scfm
Kunkle 300LGF01-AS0250 1 1/4" 250# SECT I  6185#/hr
Kunkle 300LHG01-AS0150 1 1/2"x2 1/2"Fng 150#Stm 6000
Kunkle 300LPM01-LS0035 35#STEAM RELIEF,4X6"FLG,15347P
Kunkle 300LPM01-LS0070 70# STEAM RELIEF 4X6" FLNGD
Kunkle 300LQP01-LS0015 15# STEAM RELIEF VALVE 6"
Kunkle 333S-A01-KC4500 1/4"mX1/2"f 4500# PRESS RELIEF
Kunkle 363C-C01-KH0550 1/2" NPT RELF VALVE 338SCFM
Kunkle 363C-C01-KH0650 1/2"npt AirRelf 650# 397scfm
Kunkle 40RL-D01-PE0055 3/4" Lever Steam Relief 55#
Kunkle 6010DCM01-AM0015 1/2"x3/4" 15#SteamRelf 173#HR
Kunkle 6010DCM01-AM0025 1/2"x3/4" 25#SteamRelf 228#/HR
Kunkle 6010DCM01-AM0030 1/2"x 3/4" 30#SteamRelf 255#HR
Kunkle 6010DCM01-AM0040 1/2"x3/4" 40#SteamRelf 310#HR
Kunkle 6010DCM01-AM0045 1/2" x 3/4" 45#SteamRelf337#hr
Kunkle 6010DCM01-AM0050 1/2"x3/4" 50#StmRlf 365PPH
Kunkle 6010DCM01-AM0090 1/2"x3/4" 90#SteamRlf 587pph
Kunkle 6010DCM01-AM0100 1/2"x3/4" 100#SteamRlf 643#HR
Kunkle 6010DCM01-AM0125 1/2"x3/4" 125#SteamRlf 784#hr
Kunkle 6010DCM01-AM0150 1/2"x3/4" 150#StmRlf 925PPH
Kunkle 6010DCM01-AM0250 1/2"x3/4"SteamRelf 250#1488#PH
Kunkle 6010DCM01-KM0015 1/2"x3/4" 15#AirRelief,64scfm
Kunkle 6010DCM01-KM0035 1/2" 104scfm ReliefValve 35#
Kunkle 6010DCM01-KM0050 1/2" 136scfm ReliefValve
Kunkle 6010DCM01-KM0100 1/2"x3/4" 100#AirRelf 243CFM
Kunkle 6010DCM01-KM0110 1/2"x3/4" 110#AirRelf 264cfm
Kunkle 6010DCM01-KM0120 1/2"x3/4" 120#AirRelf 286scfm
Kunkle 6010DCM01-KM0125 1/2"x3/4" 125#AirRelf 296scfm
Kunkle 6010DCM01-KM0135 1/2"mX3/4"f AirRelief,Set@135#
Kunkle 6010DCM01-KM0150 1/2"x3/4"MxF Air 150# 350CFM
Kunkle 6010DCM01-KM0200 1/2"x3/4" 200#AirRelf 457scfm
Kunkle 6010DCM01-KM0232 1/2"m X 3/4"f 232#Air Relief
Kunkle 6010DCM01-KM0300 1/2"x3/4" 300#AirRelf 671 scfm
Kunkle 6010DCM01-LM0015 1/2"x 3/4"15#Steam 179#hr
Kunkle 6010DCM01-LM0025 1/2"x 3/4" 25# STEAM
Kunkle 6010DCM01-LM0040 1/2x3/4" 40#Steam321#hrSecVIII
Kunkle 6010DCM01-LM0055 1/2"X3/4" 55#SteamRlf 411#/HR
Kunkle 6010DCM01-LM0060 1/2x3/4" 60#SteamSecVII 442#hr
Kunkle 6010DCM01-LM0070 1/2x3/4" 70#SteamSecVIII502#hr
Kunkle 6010DCM01-LM0090 1/2X3/4"90#STEAM RLF,622#PH
Kunkle 6010DCM01-NM0010 1/2"x 3/4" AIR RELIEF SET@ 10#
Kunkle 6010DDM01-AM0015 3/4"x3/4" 15#SteamRelf 173#HR
Kunkle 6010DDM01-AM0020 3/4"x3/4" 20#SteamRelf 201#hr
Kunkle 6010DDM01-AM0025 3/4"x3/4" 25#Steam 228#HR
Kunkle 6010DDM01-AM0030 3/4"x3/4" 30#SteamRelf 255#HR
Kunkle 6010DDM01-AM0045 3/4"x3/4" 45#SteamRel 337#/HR
Kunkle 6010DDM01-AM0060 3/4"x3/4" 60#SteamRelf 419#hr
Kunkle 6010DDM01-AM0100  3/4"x3/4" 100# STEAM RELIEF
Kunkle 6010DDM01-AM0115 3/4"x3/4" 115#SteamRelf
Kunkle 6010DDM01-AM0125 3/4"x3/4" 125#SteamRelf 784#HR
Kunkle 6010DDM01-AM0150 3/4"x3/4" 150#SteamRelf
Kunkle 6010DDM01-AM0175 3/4"x3/4" 175# SteamRelfVlv
Kunkle 6010DDM01-KM0138 3/4" 324scfm 138# AirRlfVlv
Kunkle 6010DDM01-KM0200 3/4x3/4 AIR RELIEF 200#,457CFM
Kunkle 6010DDM01-LM0025 3/4x3/4" 25#SteamSecVIII234#HR
Kunkle 6010DDM01-LM0030 3/4x3/4" 30#SteamSecVIII261#hr
Kunkle 6010DDM01-LM0050 3/4X3/4steam relief 50# 329PPH
Kunkle 6010DDM01-LM0075 3/4X3/4steam relief75#-532PPH
Kunkle 6010DDM01-LM0100 3/4"x 3/4" 100# STEAM 682PPH
Kunkle 6010DDM01-LM0110 3/4"x3/4" 110#Steam 742#/HR
Kunkle 6010EDE01-AM0070 3/4"x1" 70# SteamRelf 847#/HR
Kunkle 6010EDE01-AM0150 3/4"x1" 150# SteamRelf 1651PPH
Kunkle 6010EDE01-LM0080 3/4"x1" 80# SteamRelf 1003#HR
Kunkle 6010EDM01-AM0015 3/4"x1" 15#SteamRelf 309#hr
Kunkle 6010EDM01-AM0020 3/4"x1" 20#SteamRelf 358PPH
Kunkle 6010EDM01-AM0025 3/4"x1" 25#SteamRelf 407#HR
Kunkle 6010EDM01-AM0035 3/4"x1" 35# STEAM RELF 504pph
Kunkle 6010EDM01-AM0040 3/4"x1" 40#SteamRelf 553PPH
Kunkle 6010EDM01-AM0050 3/4"x1" 50#SteamRelf 651#hr
Kunkle 6010EDM01-AM0060 3/4"x1" 60#SteamRelf 748PPH
Kunkle 6010EDM01-AM0075 3/4"X1" 75#Steam Rel vlv
Kunkle 6010EDM01-AM0100 3/4"x1" 100#SteamRelf 1148#hr
Kunkle 6010EDM01-AM0125 3/4"x1" 125#SteamRelf 1400#HR
Kunkle 6010EDM01-AM0137 3/4"X1" 137#SteamRelf 1520#HR
Kunkle 6010EDM01-AM0150 3/4"x1" 150#SteamRelf 1651#hr
Kunkle 6010EDM01-KM0085 3/4" 376 SCFM AIR SET@ 85
Kunkle 6010EDM01-KM0100 3/4"m X 1"f 100#AIR relief
Kunkle 6010EDM01-KM0110 3/4"m X 1"f 110# air
Kunkle 6010EDM01-KM0125 3/4x1"ReliefVlvSet@125#529scfm
Kunkle 6010EDM01-KM0135 3/4"x1" 135#AirGas 567SCFH
Kunkle 6010EDM01-KM0207 3/4"m X 1"f 207#Air Relief
Kunkle 6010EDM01-LM0015 3/4X 1" 15# STEAM
Kunkle 6010EDM01-LM0020 3/4x1" 20#SteamSecVIII 368#hr
Kunkle 6010EDM01-LM0030 3/4x1" 30#SteamSecVIII 466#hr
Kunkle 6010EDM01-LM0045 3/4x1" 45#SteamSecVIII 627#hr
Kunkle 6010EDM01-LM0050 3/4x1" 50#SteamSecVIII 681#hr
Kunkle 6010EDM01-LM0075 3/4x1" 75#SteamSecVIII 949#hr
Kunkle 6010EDM01-LM0100 3/4"x 1" 100# STEAM 1218PPH
Kunkle 6010EDM01-LM0150 3/4x1" 150#SteamSecVIII 1755#
Kunkle 6010EDM01-LM0250 3/4"x1" 250#SteamRelf 2829#hr
Kunkle 6010EEM01-AM0015 1"x1" 15#SteamRelf 319#HR
Kunkle 6010EEM01-AM0020 1"X1"20#STEAM RELIEF 358#PH
Kunkle 6010EEM01-AM0030 1"x1" 30#SteamRlf 456#hr
Kunkle 6010EEM01-AM0050 1"x 1" 50#SteamRelf 651#hr
Kunkle 6010EEM01-AM0060 1"x1" 60#SteamRelf 748#hr
Kunkle 6010EEM01-AM0100 1"M X 1"F 100# FOR STEAM RELIE
Kunkle 6010EEM01-AM0150 1"M X 1"F 150# STEAM RELIEF
Kunkle 6010EEM01-KM0125 1"x1" 125#AirRelf 529scfm
Kunkle 6010EEM01-KM0150 1"x1" 150#AirRelf 625scfm
Kunkle 6010EEM01-KM0200 1X1 200# AIR 816 SCFM
Kunkle 6010EEM01-LM0025 1"x1" 25#SteamSecVIII 410#hr
Kunkle 6010EEM01-LM0030 1"x1" 30#SteamSecVIII 466#hr
Kunkle 6010EEM01-LM0040 1"x1" 40#SteamRelf 573PPH
Kunkle 6010EEM01-LM0050 1"x1" 50#SteamSecVIII 681#hr
Kunkle 6010EEM01-LM0140 1"x1" RELF VLV 140# 1648pph
Kunkle 6010FE01-LM0250 1" x 1.25" 250# 4428PPH RELIEF
Kunkle 6010FEE01-AM0150 1"x 1.25"150#SteamRelf 2583#PH
Kunkle 6010FEM01-AM0025 1 X 1 1/4 STEAM RLF 25# 637pph
Kunkle 6010FEM01-AM0030 1"x 1.25" 30#SteamRelf 729#hr
Kunkle 6010FEM01-AM0040 1"x 1.25" 40#SteamRelf 866pph
Kunkle 6010FEM01-AM0045 1"x 1.25" 45#SteamRelf 942pph
Kunkle 6010FEM01-AM0050 1" x 1.25" SET @ 50# 1018pph
Kunkle 6010FEM01-AM0060 1" x 1.25" SET @ 60# 1171pph
Kunkle 6010FEM01-AM0065 1"x 1.25" 65#SteamRelf 1247#hr
Kunkle 6010FEM01-AM0070 1" Steam Relief 70# 1325PPH
Kunkle 6010FEM01-AM0075 1" x 1.25" 75#SteamRel 1404#HR
Kunkle 6010FEM01-AM0085 1"x 1.25" 85#SteamRelf 1654#HR
Kunkle 6010FEM01-AM0100 1"x 1.25" 100#SteamRel 1797#hr
Kunkle 6010FEM01-AM0125 1"x 1.25",125 STM RELIEF 2190#
Kunkle 6010FEM01-AM0135 1x1.25 135#SteamRlf 2348pph
Kunkle 6010FEM01-AM0150 1"x 1.25" 150#SteamRel 2583#hr
Kunkle 6010FEM01-AM0200 1"x 1.25" 200#SteamRel 3370#hr
Kunkle 6010FEM01-KM0135 1x1.25" 135# AirSecVIII
Kunkle 6010FEM01-KM0150 1"m X 1.25"f 150# Air Relief
Kunkle 6010FEM01-KM0160 1"m X 1.25"f 160#Air Relief
Kunkle 6010FEM01-KM0200 1x1.25"200#AirSecVIII 1277scfm
Kunkle 6010FEM01-LM0015 1x1.25"15#SteamRelief 500#ph
Kunkle 6010FEM01-LM0025 1 x1.25" 25#SteamSecVIII653#hr
Kunkle 6010FEM01-LM0030 1 x1.25" 30#SteamSecVIII729#hr
Kunkle 6010FEM01-LM0045 1x1.25"45#SteamSecVIII 981PPH
Kunkle 6010FEM01-LM0050 1x1.25"50#StmOffBoiler 1065#hr
Kunkle 6010FEM01-LM0060 1"X 1.5" 60# STM.1233 PPH
Kunkle 6010FEM01-LM0075 1"x1 1/4" 75#STEAM
Kunkle 6010FEM01-LM0150 1"x1 1/4" 150# Steam 2746 PPH
Kunkle 6010FEM01-LM0160 1"x1 1/4" 160#Steam10% 2915#hr
Kunkle 6010FEM01-LM0250 1"M x 1 1/4"F BRZ #250 4428PPH
Kunkle 6010FEM01-NM0012 1x1.25" 12#Air 175scfm NonCode
Kunkle 6010FEN01-LM0075 1"x1 1/4" 75#STEAM
Kunkle 6010FF01-KM0188 1.25x1.25 188#AirRelf
Kunkle 6010FFM01-AM0015 1.25x1.25" 15#SteamRel 484#hr
Kunkle 6010FFM01-AM0050 1.25"x1.25" SET@ 50# 1065pph
Kunkle 6010FFM01-AM0125 1.25x1.25" 125#SteamRel2190#hr
Kunkle 6010FFM01-AM0150 1.25x1.25" 150#SteamRel2583#hr
Kunkle 6010FFM01-LM0030 1.25"mxf 30#SteamSecVIII729#hr
Kunkle 6010FFM01-LM0040 1.25"x1.25" 40# Steam 866PPH
Kunkle 6010GFE01-AM0150 1.25"x1.5" 150#Stm 4234#hr EPR
Kunkle 6010GFM01-AM0015 1.25x1.5" 15#SteamRelf 793#hr
Kunkle 6010GFM01-AM0020 1.25"x 1.5" 20#SteamRel 918#hr
Kunkle 6010GFM01-AM0030 1.25x1.5" 30#SteamRel 1169#hr
Kunkle 6010GFM01-AM0035 1.25"x1.5" 35#Steam 1294#/HR
Kunkle 6010GFM01-AM0040 1.25"x1.5" 40#StmRlf 1419#HR
Kunkle 6010GFM01-AM0050 1.25"x 1.5" 50#steam 1669#/HR
Kunkle 6010GFM01-AM0075 1.25 X 1.5" 75#Steam 2301#HR
Kunkle 6010GFM01-AM0090 1.25"x 1.5" 90# STEAM 2688#HR
Kunkle 6010GFM01-AM0100 1.25"x 1.5" 100#Steam 2946#HR
Kunkle 6010GFM01-AM0125 1.25"x 1.5" 125#Steam 3590#HR
Kunkle 6010GFM01-AM0150 1.25"x 1.5" 150#Steam 4234#HR
Kunkle 6010GFM01-AM0200 1.25"x1.5" 200#STEAM 5523 PPH
Kunkle 6010GFM01-AM0250 1.25"x 1.5" 250#Steam 6812#HR
Kunkle 6010GFM01-AM0300 1.25"x1.5" 300#Steam 8101#HR
Kunkle 6010GFM01-KM0135 1.25"x1.5"AirRelf135# 1455scfm
Kunkle 6010GFM01-KM0160 1.25"m X 1.5"f 160#Air Relief
Kunkle 6010GFM01-LM0050 1.25x1.5" 50#SteamSecVIII1746#
Kunkle 6010GFM01-LM0060 1.25X1.5 60STEAM SECT 8 2022#
Kunkle 6010GFM01-LM0070 1.25X1.5 75STEAM SECT 8 2297#
Kunkle 6010GFM01-LM0075 1.25X1.5 75STEAM SECT 8 2435#
Kunkle 6010GFM01-LM0100 1.25"x1.5" STEAM 3124pph @100#
Kunkle 6010GFM01-LM0115 1.25"x1.5" STEAM 3522pph @115#
Kunkle 6010GGM01-AM0020 1.5"x 1.5" 20#Steam 918 PPH
Kunkle 6010GGM01-AM0025 1.5"x 1.5" 25#Steam 1045#HR
Kunkle 6010GGM01-AM0150 1.5"x 1.5" 150#Steam 4234#HR
Kunkle 6010GGM01-AM0200 1.5"x1.5" 200#SteamRel 5879#HR
Kunkle 6010GGM01-KM0150 1.5"x1.5" 150#AirRelf 1602scfm
Kunkle 6010GGM01-LM0025 1.5x1.5" 25#SteamSecVIII 1070#
Kunkle 6010GGM01-LM0040 1.5x1.5" 40#SteamSecVIII 1470#
Kunkle 6010GGM01-LM0045 1.5X1.5" 45#SteamSecVIII 1608#
Kunkle 6010HGE01-AM0150 1.5"x 2" 150#SteamRel 6596#hr
Kunkle 6010HGE01-AM0250 1.5"x 2" 250#SteamRel 10612pph
Kunkle 6010HGM01-AM0015 1.5"x 2" 15#SteamRelf 1236#HR
Kunkle 6010HGM01-AM0020 1.5"x 2" 20#SteamRel 1431#hr
Kunkle 6010HGM01-AM0025 1.5"x2" 25#StmRlf SecI 1626#hr
Kunkle 6010HGM01-AM0030 1.5"x2" 30#SteamRel 1861#HR
Kunkle 6010HGM01-AM0035 1.5"X2" 35#SteamRlf 2015#HR
Kunkle 6010HGM01-AM0050 1.5"x 2" 50#SteamRelf 2600#hr
Kunkle 6010HGM01-AM0060 1.5"x 2" 60#SteamRel 2990#hr
Kunkle 6010HGM01-AM0070 1.5"x 2" 70#SteamRel 3384#hr
Kunkle 6010HGM01-AM0075 1.5"x 2" 75#SteamRelf 3585#hr
Kunkle 6010HGM01-AM0090 1.5"x 2" 90# STEAM  4187 #hr
Kunkle 6010HGM01-AM0100 1.5"x 2" 100#SteamRelf 4588#hr
Kunkle 6010HGM01-AM0125 1.5"x 2" 125#SteamRelf 5592#hr
Kunkle 6010HGM01-AM0150 1.5"x 2" 150#SteamRel 6596#hr
Kunkle 6010HGM01-AM0200 1.5"x 2" 200#SteamRel 8604#hr
Kunkle 6010HGM01-KM0125 1.5"X2"SET@ 125 2114 SCFM
Kunkle 6010HGM01-KM0135 1.5x2"AirReliefVlv135# 2267cfm
Kunkle 6010HGM01-KM0140 1.5x2"AirReliefVlv140# 2343SCF
Kunkle 6010HGM01-KM0160 1.5"m X 2"f 160#Air Relief
Kunkle 6010HGM01-LM0025 1.5"x2" 25#StmRlfSecVIII 1666#
Kunkle 6010HGM01-LM0030 1.5"x 2" 30#SteamSecVIII 1861#
Kunkle 6010HGM01-LM0050 1.5"x2"SET@ 50# steam 2720pph
Kunkle 6010HGM01-LM0070 1.5"x2" SET@ 70# STEAM 3578pph
Kunkle 6010HGM01-PM0010 1.5x2" 10#SteamNonCode 1083#hr
Kunkle 6010HGM1-LM0015 1.5"m X 2"f,15#,STEAM,1215PPH
Kunkle 6010HGMO01-AM0045 1.5"m X 2"f 45# Steam 2405pph
Kunkle 6010HH01-AM0070 2"x2" Steam Relief 70# 3384pph
Kunkle 6010HHM01-AM0020 2"x2" STEAM RELIEF 20#
Kunkle 6010HHM01-AM0025 2"x2" 25#SteamRelf 1626#HR
Kunkle 6010HHM01-AM0125 2"x2" 125#SteamRelf 5592#HR
Kunkle 6010HHM01-AM0150 2"x2" 150#SteamRelf 6596#HR
Kunkle 6010HHM01-KM0030 2"x 2" 30#AirRelf 663scfm
Kunkle 6010HHM01-KM0150 2x2 MxF AirRelf150# 2496scfm
Kunkle 6010HHM01-LM0015 2"MXF 15# 1276PPH STEAM RELIEF
Kunkle 6010HHM01-LM0020 2"MXF 20# 2342 PPH SteamRelief
Kunkle 6010HHM01-LM0025 2"MXF 25# 1666PPH SteamRelief
Kunkle 6010HHM01-LM0030 2"X2", 30#SteamRelf, 1861#HR
Kunkle 6010HHM01-LM0035 2" MXF 35# 2076#/HR STEAM
Kunkle 6010HHM01-LM0040 2" MXF 40# 2291#/HR STEAM
Kunkle 6010HHM01-LM0050 2" MXF 50# 2720#/HR STEAM
Kunkle 6010HHM01-LM0060 2"STEAM RELEIF 60#,3149#PH
Kunkle 6010HHM01-LM0150 2"x 2"StmRelief 150# 6596PPH
Kunkle 6010HHV01-NM0010 2"ReliefVlv10#set,VitonSeat
Kunkle 6010HJM01-LM0025 2",2730CAPACITY,STEAM RELIEF
Kunkle 6010JHE01-AM0050 2"X2.5", 50#SteamRlf, 4260#/HR
Kunkle 6010JHE01-AM0150 2"x2.5" 150#SteamRel;10,808PPH
Kunkle 6010JHM01-AM0015 2"x2.5" 15#SteamRelf 2025#hr
Kunkle 6010JHM01-AM0020 2"x2.5" 20#SteamRelf 2344#hr
Kunkle 6010JHM01-AM0025 2"x2.5" 25#SteamRelf 2664#hr
Kunkle 6010JHM01-AM0030 2"x 2.5" 30#SteamRelf 2983#hr
Kunkle 6010JHM01-AM0040 2"x2.5" 40#SteamRelf 3622#hr
Kunkle 6010JHM01-AM0050 2"x 2.5" 50#SteamRelf 4260#hr
Kunkle 6010JHM01-AM0075 2"x2 1/2" 75#StmRlf 5873pph
Kunkle 6010JHM01-AM0100 2"x2.5" 100#SteamRelf 7518#hr
Kunkle 6010JHM01-AM0125 2x2.5 STEAM 125# 9163PPH
Kunkle 6010JHM01-AM0130 2"x2 1/2" 130#StmRlf 9492pph
Kunkle 6010JHM01-AM0135 2"x2 1/2" 135#StmRlf 9821pph
Kunkle 6010JHM01-AM0150 2"x 2.5" 150#SteamRel 10808#HR
Kunkle 6010JHM01-AM0155 2x2.5" 155#SteamRelf 11000#hr
Kunkle 6010JHM01-AM0200 2"x 2.5" 200#SteamRel 14097#HR
Kunkle 6010JHM01-KM0006 2"x2.5"AirReliefVlv 6#456scfm
Kunkle 6010JHM01-KM0045 2"x2 1/2" 45# 1461scfm
Kunkle 6010JHM01-KM0100 2 x 2 1/2" 100# Rlf 2838scfm
Kunkle 6010JHM01-KM0125 2x2.5"AirReliefVlv125# 3464cfm
Kunkle 6010JHM01-KM0150 2x2.5"AirReliefVlv150# 4090cfm
Kunkle 6010JHM01-LM0015 2"x2.5" 15#SteamSecVIII2091#HR
Kunkle 6010JHM01-LM0020 2"x2.5" 20#SteamSecVIII2410#HR
Kunkle 6010JHM01-LM0030 2"x2.5" 30#SteamSecVIII3050#HR
Kunkle 6010JHM01-LM0045 2"x2.5" 45#SteamRelf 4105#hr
Kunkle 6010JHM01-PM0010 2x2.5" 10# NonCode Stm Rlf Vlv
Kunkle 6010JHM02-AM0060 2"x2.5" 60#SteamRel 4899#HR
Kunkle 6010JHM02-AM0150 2"x 2.5" 150#SteamRel 10808#HR
Kunkle 6010JJM01-AM0015 2.5"X2.5" 15#SteamRlf 2025pph
Kunkle 6010JJM01-AM0025 2.5"x2.5" 25#SteamRel 2664#HR
Kunkle 6010JJM01-AM0030  2.5"x2.5" 30#SteamRelf2730#HR
Kunkle 6010JJM01-AM0035 2 1/2" 35# 3302#PH STEAM REL.
Kunkle 6010JJM01-AM0045 2.5"x2.5" 45#SteamRelf 4105#HR
Kunkle 6010JJM01-AM0050 2.5"x2.5" 50#SteamRel 4260#HR
Kunkle 6010JJM01-AM0090 2.5"x2.5" 90#SteamRelf 7270#HR
Kunkle 6010JJM01-AM0100 2.5"X2.5",100#StmRelf,7518#/hr
Kunkle 6010JJM01-AM0125 2.5"x2.5" 125#SteamRel 9163#hr
Kunkle 6010JJM01-KM0035 2 1/2"35#AIR/GAS 1211SCFM REL.
Kunkle 6010JJM01-KM0045 2.5"x2.5" 45#AirRel 1461SCFM
Kunkle 6010JJM01-LM0080 2.5"x2.5" 80#SteamRelf 6566#HR
Kunkle 6021DCM01-AM0040 1/2"X3/4" 40# STM RLF,310 PPH
Kunkle 6021DCM01-AM0100 1/2"X3/4"100#SteamRelief643#ph
Kunkle 6021DCM01-LM0040 1/2"X3/4" 40# STM RLF, 321PPH
Kunkle 6021DCM01-LM0050 1/2"x3/4" 50#SteamRelf 381#HR
Kunkle 6021DCM01-LM0100 1/2"X3/4" 100# 682PPH STM RLF
Kunkle 6021DDM01-AM0030 3/4"x3/4", 30# 225PPH, StmRlf
Kunkle 6021ED01-AM0055 3/4"X1", 55#, SteamRlf, 700PPH
Kunkle 6021EDM01-AM0025 3/4"X1", 25#, SteamRlf, 407PPH
Kunkle 6021EDM01-AM0030 3/4"x1" 30# @456PPH, StmRlf
Kunkle 6021EDM01-AM0100 3/4"x1"SteamRlf, 100# 1148pph
Kunkle 6021EDM01-AM0125 3/4"x1"SteamRlf,1400#/hr,125#
Kunkle 6021EDM01-AM0200 3/4"x1" 200# STEAM RELF VLV
Kunkle 6021EDM01-LM0025 3/4"X1", 25#, SteamRlf, 417PPH
Kunkle 6021EDM01-LM0045 3/4"x 1" 45#, 627PPH StmRlf
Kunkle 6021EDT01-AM0150 3/4x1 150# 1653PPH SteamRlfVlv
Kunkle 6021FE01-AM0020 1"X1 1/4" 20# 560PPH REL VAL
Kunkle 6021FE01-AM0050 1"X1 1/4" 50# 1018PPH REL VAL
Kunkle 6021FE01-LM0100 1x1.25"100#StmOffBoiler1797#PH
Kunkle 6021FEM01-AM0090 1"x 1 1/2" @90# 1640PPH STEAM
Kunkle 6021FEM01-AM0125 1"x1.25" 125#SteamRelf 2190#HR
Kunkle 6021FEM01-AM0150 1"x 1 1/4" @150# 2583PPH Stm
Kunkle 6021FFM01-LM0030 1 1/4"x1 1/4" @30# 729PPH STM
Kunkle 6021GFM01-AM0030 1 1/4"x1 1/2" @30# 1169PPH
Kunkle 6021GFM01-AM0050 1 1/4"x1 1/2" @50# 1669PPH
Kunkle 6021GFM01-AM0100 1.25x1.5" 100#Steam 3124#/HR
Kunkle 6021GFM01-AM0110 1 1/4"x1 1/2" @110  3203PPH
Kunkle 6021GFM01-AM0125 1 1/4"x1 1/2" @125# 3590PPH
Kunkle 6021GFM01-AM0150 1 1/4"x1 1/2" @150# 4234PPH
Kunkle 6021GGM01-AM0150 1.5"x1.5" 150#Steam 4234#HR
Kunkle 6021HG01-AM0160 1 1/2"X 2" 160#Steam 6998PPH
Kunkle 6021HGM01-AM0015 1.5"x2" 15#SteamRelf 1236#HR
Kunkle 6021HGM01-AM0050 1 1/2"x 2" @50# STEAM 2600PPH
Kunkle 6021HGM01-AM0060 1 1/2"x 2" @60# STEAM 2990 PPH
Kunkle 6021HGM01-AM0090 1 1/2"x 2" @90# 4187PPH STEAM
Kunkle 6021HGM01-AM0150 1 1/2"x 2" 150#Steam 6596PPH
Kunkle 6021HGM01-AM0200 1 1/2"x 2" 200# STEAM VALVE
Kunkle 6021HGM01-AM0250 1 1/2"x 2" @250# 10612PPH
Kunkle 6021HGM01-LM0010 1.5"X2" 10#SteamSecVIII 1083#
Kunkle 6021HHM01-LM0060 2" 60# 2990#ph STEAM RELIEF
Kunkle 6021HHM01-LM0075 2"x2" @75# 3793PPH, STEAM RLF
Kunkle 6021JHM01-AM0035 2"x 2 1/2"@35#StmRlf 3302pph
Kunkle 6021JHM01-AM0050 2"x 2 1/2" @50# 4260PPH StmRlf
Kunkle 6021JHM01-AM0060 2"x 2 1/2" @50# 4899#PH stmrlf
Kunkle 6021JHM01-AM0075 2"x 2 1/2" @75 5873PPH StmRlf
Kunkle 6021JHM01-AM0110 2"x2 1/2" @110# 8176PPH StmRlf
Kunkle 6021JHM01-AM0150 2"x2 1/2" @150# 10808PPH STEAM
Kunkle 6021JHM01-AM0155 2"x2 1/2" @155 10121PPH STEAM
Kunkle 6021JHM01-AM0170 2"x2 1/2" @170 StmRlf
Kunkle 6021JHM01-AM0200 2 X 2 1/2" @200# 14097pphSTEAM
Kunkle 6021JHM01-AM0250 2"x2 1/2" @250# 17387PPH STEAM
Kunkle 6021JHT01-LM0050 2"x 2 1/2" @50# 4456PPH StmRlf
Kunkle 6021JJM01-AM0050 2.5"x2.5" 50#SteamRelf 4260PPH
Kunkle 6030DCM01-AM0250 1/2"x3/4" STEAM @250# 1488PPH
Kunkle 6030DCM01-KM0185 1/2"x3/4" @185# SS 436PPH
Kunkle 6030EDM01-LM0020 3/4"x1" STEAM @20# 368PPH
Kunkle 6030GFE01-AM0020 1 1/4 X 1 1/2" @ 20PSI
Kunkle 6030GFM01-AM0150 1 1/4"X1 1/2"150#SteanRlf4234#
Kunkle 6030GFM01-AM0300 1 1/4"X1 1/2"300#SteamrLF8101#
Kunkle 6030HGE01-AM0025 1.5"mX2"f,25#, 1,626PPH VALVE
Kunkle 6030HGE01-AM075 1.5" STEAM RELIEF @ 75#
Kunkle 6030JHM01-AM0030 2"x2.5" @30# 2,983#/HR RLV VLV
Kunkle 6030JHM01-LM0150 2" 150# 11,489PPH STEAM RELIEF
Kunkle 6182DCM01-AM0075 1/2" TopOutlet 75# 503PPH
Kunkle 6182DCM01-KM0120 1/2"TOP OUTLET,@120# 286PPH
Kunkle 6182DCM01-KM0125 1/2"TOP OUTLET,@125#
Kunkle 6182EDM01-KM0015 3/4"TopOutlet @15#
Kunkle 6182EDM01-KM0060 3/4"TopOutlet @60#, 281PPH
Kunkle 6182EDM01-KM0150 3/4"TopOutlet @150# 625PPH
Kunkle 6182FEM01-KM0130 1" TopOutlet @130# 858 SCFM
Kunkle 6182FEM01-LM0125 1" TopOutlet @125# 2326PPH
Kunkle 6182GFM01-KM0150 1 1/4"TopOutlet @150# 1602PPH
Kunkle 6182HGM01-AM0050 1 1/2" 50#Steam 2600PPH
Kunkle 6182HGM01-AM0130 1 1/2" 130#Steam 5793PPH
Kunkle 6182HGM01-KM0125 1 1/2" TopOutlet 125# 2114PPH
Kunkle 6182HGM01-KM0150 1.5"RELF VLV,150 PSI,2496 PPH
Kunkle 6182HGM01-LM0125 1.5"RELF VLV 125 PSI  5939PPH
Kunkle 6182HGM02-KM0125 1.5" 125# 2114PPH W/VIBRA DMPN
Kunkle 6182HGV01-KM0140 1 1/2"TopOutlet @140# 2343PPH
Kunkle 6182JHM01-KM0125 2" Air Svc 3464SCFM TopOutlet
Kunkle 6221FEM01-AM0125 1"x1.5" 125#Steam2190#TeflDisc
Kunkle 6230EDM01-AM0200 3/4"x1.25"SStrim200#Stm2153#HR
Kunkle 6252AJG01-AM0125 1.5x2.5" STEAM 125# 9163PPH
Kunkle 6252AJG01-AM0150 1 1/2"X2 1/2"150# 10808 PPH
Kunkle 6252AJG01-AS0015 1 1/2"x2 1/2" @15# 2025PPH
Kunkle 6252AJG01-LS0015 1 1/2"x2 1/2" @15# 2091PPH STM
Kunkle 6252AJG01-LS0075 1 1/2"x2 1/2" 75# 6215pph
Kunkle 6252AKH01-AS0015 2"x3" 15# 2895PPH STEAM RELIEF
Kunkle 6252AKH01-AS0025 2"fptx3"fpt 25#Steam 3809#/HR
Kunkle 6252AKH01-AS0030 2" @ 30# 4122PPH STEAM RLF
Kunkle 6252AKH01-AS0040 2"x3" STEAM 40# 5179PPH
Kunkle 6252AKH01-AS0050 2"x3"f 50# 6092pph Steam Valve
Kunkle 6252AKH01-AS0070 2"x3" @70# 7928PPH STEAM RLF
Kunkle 6252AKH01-AS0125 2"x 3" STEAM 125# 13000 PPH
Kunkle 6252AKH01-AS0150 2x3"npt 150#steam 15,455#PH
Kunkle 6252AKH01-KS0150 2"X3"AIR 150# 5840SCFM
Kunkle 6252AKH01-LS0015 2"x3"FemXFem 15#steam 2990 PPH
Kunkle 6252AKH01-LS0030 2"x3"FemXFem 30#steam 4,361PPH
Kunkle 6252AKH01-LS0040 2"x3" STEAM 40# 5367PPH
Kunkle 6252ALJ01-AS0015 2.5"x4" 15#SteamRelf 4494#/HR
Kunkle 6252ALJ01-AS0020 2.5"x4" 20#SteamRelf 5202 PPH
Kunkle 6252ALJ01-AS0025 2.5"x4" 25#SteamRelf 5911#/HR
Kunkle 6252ALJ01-AS0030 2.5"x4" 30#SteamRelf 6620#/HR
Kunkle 6252ALJ01-AS0055 2 1/2"x 4" 55#STEAM 10,164PPH
Kunkle 6252ALJ01-AS0125 2.5X4 STEAM 125# 10,666 PPH
Kunkle 6252ALJ01-LS0015 2.5"x4" 15#StmRelf 10% 4640#/H
Kunkle 6252ALJ01-LS0020 2.5"x4" 20#StmRelf 10% 5349#/H
Kunkle 6252ALJ01-LS0025 25#SteamOffBlr6059pph2.5x4fpt
Kunkle 6252ALJ01-LS0030 30# 2.5"x4" StmRelf 6768PPH
Kunkle 6252ALJ01-LS0065 2.5"x4" 65#StmRelf 10% 11581#H
Kunkle 6252ALJ01-LS0125 2.5"x4"@125#STEAM,21,596 pph
Kunkle 6252AMK01-AL0015 3"x4" @15# 5671PPH STEAM RLF
Kunkle 6252AMK01-AS0015 3"x4" @15# 5671PPH STEAM RLF
Kunkle 6252AMK01-AS0020 3"X4" 20# STEAM RELF 6565#/HR
Kunkle 6252AMK01-AS0030 3"X4" 30# STEAM RELF 8354LB/HR
Kunkle 6252AMK01-AS0050 3"x4" @50# 11932PPH STEAM RLF
Kunkle 6252AMK01-AS0070 3"X4" 70# 15527#/HR STEAM RLF
Kunkle 6252AMK01-KM0125 3"x4" @125# 9800PPH AIR
Kunkle 6252AMK01-LS0015 3"X4" 15# STEAM RELF 5855#/HR
Kunkle 6252AMK01-LS0020 3"X4" 20# STEAM RELF 6751#/HR
Kunkle 6252AMK01-LS0125 3"X4" 125# STEAM 27253#hr
Kunkle 6252FJG01-LS0075 1.5"inFLG,2.5"Fout,7# 5942PPH
Kunkle 6252FJG01-PS0010 1.5"flgX2.5"fpt10#Steam1775#HR
Kunkle 6252FJH01-AS0070 2",STEAM,250#flgXf,70#,5544PPH
Kunkle 6252FJH01-AS0150 2"flg X 2.5"fptStm150#10808#hr
Kunkle 6252FKH01-AS0065 2"x3" STEAM 65# 7462PPH
Kunkle 6252FKH01-AS0070 2"x3" STEAM 70#
Kunkle 6252FKH01-AS0105 2"Flg X 3"fpt Stm105# 11221#hr
Kunkle 6252FKH01-AS0135 2"Flg X 3"fpt Stm135# 14044#hr
Kunkle 6252FKH01-AS0150 2"Flg X 3"fpt Stm150# 15455#hr
Kunkle 6252FKH01-AS0155 2"flg X 3"fpt Stm 155#15925#hr
Kunkle 6252FKH01-LS0020 2"FLGx3"FPT 20# 3447PPH STEAM
Kunkle 6252FKJ01-AS0015 2.5"flgX3"fm 15# Steam 2895PPH
Kunkle 6252FKJ01-AS0025 2.5"flgX3"fm 25#SteamRel 3809#
Kunkle 6252FKJ01-AS0030 2 1/2FLGx3"FPT @30# 4200PPH
Kunkle 6252FKJ01-AS0040 2 1/2FLGx3"FPT @40# 3622PPH
Kunkle 6252FKJ01-AS0045 2.5"flgX 3"fpt 45#STEAM5636pph
Kunkle 6252FKJ01-AS0050 2.5"flgX 3"fpt 50#Steam6092PPH
Kunkle 6252FKJ01-AS0055 2.5"FLGDx2.5"NPT @ 55# 6549pph
Kunkle 6252FKJ01-AS0100 2.5"FlgX3"npt 10751pph100#stm
Kunkle 6252FKJ01-AS0135 2.5flgX3"fpt135#STEAM RLF VLV
Kunkle 6252FKJ01-AS0150 2.5"FLGD X 3"FM 150#STM 13103P
Kunkle 6252FKJ01-LS0030 2 1/2"flg X 3"30#steam4,361PPH
Kunkle 6252FKJ01-LS0125 2.5"FLGD X 3" 125STEAM 13,915#
Kunkle