ASAHI- NHẬT

VAN LỌC Y ASAHI- NHẬT Y-SEDIMENT STRAINER[1/2-4inch]（15-100mm）

1.000.000 đ

VAN LỌC Y ASAHI- NHẬT Y-SEDIMENT STRAINER[1/2-4inch]
SIZE: 15-100mm

Because of its plastic body, the sediment STRAINER (Y) is higly corrosion chemical and wear resistant. The body is transparent, so that flow through the STRAINER can easily be checked. The sediment STRAINER is easy to disassemble and reassemble to clean or replace its screen.

Anh chị vui lòng gọi điện hoặc gửi ZALO qua số 0902720814 / 0907450506 gặp Nhân viên kinh doanh để được tư vấn kỹ thuật và báo giá cụ thể hoặc email vào hòm thư: sales@pm-e.vn / info@pm-e.vn

VAN ĐIỀU KHIỂN ASAHI- NHẬT NEEDLE VALVE[1/2-1inch]

1.000.000 đ

VAN ĐIỀU KHIỂN ASAHI- NHẬT NEEDLE VALVE[1/2-1inch]
SIZE: 15-25mm

A shut-off valve and the rubber seat completely seals the fluid. Being independent of a shut-off valve, the NEEDLE VALVE exercises highly accurate control for a long time. The NEEDLE VALVE uses a unique plug in a special shape, thus offering accurate flow control. With its piping intact, the NEEDLE VALVE can be inspected or cleaned inside only by removing its bonnet (valves in 15 and 20mm in nominal size)

VAN ĐIỀU KHIỂN ASAHI- NHẬT CONSTANT FLOW VALVE[1/2-4inch]（15-100mm）

1.000.000 đ

VAN ĐIỀU KHIỂN ASAHI- NHẬT CONSTANT FLOW VALVE[1/2-4inch]（15-100mm）
SIZE: 15-100mm


High Accuracy: The CONSTANT FLOW VALVE accurately controls the flow rate to within ±6％ of the full scale value and offers high rangeability (set value for maximum flow rate/set value for minimum flow rate).
Flexible Flow Rate: Using the handle, the flow rate setting on the valve can be changed at will. Because it completely shuts off flow, the CONSTANT FLOW VALVE can also be used as shut off valve.
Opening Degree Indicator: The CONSTANT FLOW VALVE has indicator showing opening degree which reads the flow rate (m3/hour).
High Durability and Resistance to Chemicals: The CONSTANT FLOW VALVE uses a spring made of Stainless Steel coated with PCTFE (Polychloro-frifluoro-ethylene). The spring is highly durable and chemical-resistant, it has high cycle life.

VAN ĐIỀU KHIỂN ASAHI- NHẬT SELF CONTROL VALVE（15-50mm）

1.000.000 đ

VAN ĐIỀU KHIỂN ASAHI- NHẬT SELF CONTROL VALVE（15-50mm）
SIZE: 15-50mm

Reliable Watertightness: The rubber valve seat, a soft seal type, offers reliable shut-off.
Provides Smooth Flow: Being free of cavities, the valve body has no sand or foreign matter build up in it, thus providing a smooth flow.

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-S (Soft Seal) ROUND HANDLE [2-8inch]

1.000.000 đ

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-S (Soft Seal) ROUND HANDLE [2-8inch]
SIZE: 50-200mm

Reliable Watertightness: The rubber valve seat, a soft seal type, offers reliable shut-off.
Provides Smooth Flow: Being free of cavities, the valve body has no sand or foreign matter build up in it, thus providing a smooth flow.

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-P (PLUG) ROUND HANDLE [1 1/4-14inch]

1.000.000 đ

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-P CAP [1 1/4-14inch]
SIZE: 32-350mm

High Corrosion and Impact-resistance: All wet sections are made of corrosion-resistant material, thus preventing corrosion and turbid water due to rust, The GATE VALVE, made of high impact polyvinyl chloride, can be used for water supply and drainage.
Light and Rugged Structure: Being made of synthetic resin, the ASAHI AV GATE VALVE is about 1/5 as heavy as a cast iron gate valve. However, the ASAHI AV GATE VALVE gives the same torque strength as a cast iron gate valve, so it endures high torque.
Flexibility Covering Flow Variations: The gate valve is so flexible in covering many flow variations with tight shut-off.
Easy Maintenance: The stem sealed with an O-ring, prevents external leaks and is easy to replace.

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-P CAP [1 1/4-14inch]

1.000.000 đ

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-P CAP [1 1/4-14inch]
SIZE: 32-350mm

High Corrosion and Impact-resistance: All wet sections are made of corrosion-resistant material, thus preventing corrosion and turbid water due to rust, The GATE VALVE, made of high impact polyvinyl chloride, can be used for water supply and drainage.
Light and Rugged Structure: Being made of synthetic resin, the ASAHI AV GATE VALVE is about 1/5 as heavy as a cast iron gate valve. However, the ASAHI AV GATE VALVE gives the same torque strength as a cast iron gate valve, so it endures high torque.
For Shallow Depth Mounting: Compact design allows for shallow depth mounting (Size; 32 - 200mm)

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE 66 CAP [1 1/4-6inch]

1.000.000 đ

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE 66 CAP [1 1/4-6inch]
SIZE: 32-150mm


JWWA B125 Synthetic Resin Soft Seal Sluice Valve: Compatible with the Japan Water Works Association Standard (JWWA B125 Synthetic Resin Soft Seal Sluice Valve), the valve can be safely used for water distribution / supply. (Size; 125mm)
Over-tightening Prevention: Equipped with Over-tightening prevention mechanism to prevent accidents due to excessive tightening.
Excellent Water Tightness: The channel surface free from irregularities allows for smooth flow. The rubber soft seal ensures excellent water tightness.
For Shallow Depth Mounting: Compact design allows for shallow depth mounting (Size; 32 - 200mm)

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-S CAP [2 1/2-8inch]

1.000.000 đ

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-S CAP [2 1/2-8inch]
SIZE: 65-200mm


JWWA B125 Synthetic Resin Soft Seal Sluice Valve: Compatible with the Japan Water Works Association Standard (JWWA B125 Synthetic Resin Soft Seal Sluice Valve), the valve can be safely used for water distribution / supply. (Size; 125mm)
Excellent Water Tightness: The channel surface free from irregularities allows for smooth flow. The rubber soft seal ensures excellent water tightness.
For Shallow Depth Mounting: Compact design allows for shallow depth mounting (Size; 32 - 200mm)

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-S (Soft Seal) OUTSIDE SCREW ROUND HANDLE [1 1/2-8inch]

1.000.000 đ

VAN CỬA ASAHI- NHẬT GATE VALVE TYPE-S (Soft Seal) OUTSIDE SCREW ROUND HANDLE [1 1/2-8inch]
SIZE: 40-200mm


High Corrosion and Impact-resistance: All wet sections are made of corrosion-resistant material, thus preventing corrosion and turbid water due to rust, The GATE VALVE, made of high impact polyvinyl chloride, can be used for water supply and drainage.
Excellent Water Tightness: The channel surface free from irregularities allows for smooth flow. The rubber soft seal ensures excellent water tightness.
No Foreign Object does not Enter: The Stem screw is not exposed to the fluid, no foreign object does not enter.

VAN MỘT CHIỀU ASAHI- NHẬT BALL FOOT VALVE[1/2-4inch]

1.000.000 đ

VAN MỘT CHIỀU ASAHI- NHẬT BALL FOOT VALVE[1/2-4inch]
SIZE: 15-100mm

Backflow Prevention: The valves prevent back fiow in horizontal or vertical lines. They require minimal back pressure to seat completelly.
Compact and Light: The BALL CHECK and BALL FOOT VALVES are so compact and light that they can be installed in a limited space. They are also easy to maintain,because of minimal internal parts.

VAN MỘT CHIỀU ASAHI- NHẬT SINGLE UNION BALL CHECK VALVE[1/2-4inch]

1.000.000 đ

VAN MỘT CHIỀU ASAHI- NHẬT SINGLE UNION BALL CHECK VALVE[1/2-4inch]
SIZE: 15-100mm


Backflow Prevention: The valves prevent back fiow in horizontal or vertical lines. They require minimal back pressure to seat completelly.
Compact and Light: The BALL CHECK and BALL FOOT VALVES are so compact and light that they can be installed in a limited space. They are also easy to maintain,because of minimal internal parts.
For inquiry on this product

VAN MỘT CHIỀU ASAHI- NHẬT WAFER CHECK VALVE[4-12inch]

1.000.000 đ

VAN MỘT CHIỀU ASAHI- NHẬT WAFER CHECK VALVE[4-12inch]
SIZE: 80-300mm

High strength: Capitalizing on the stress analysis, they relieve users of any concerns about the strength of resin-made wafer checks.
High corrosion resistance: All components contacting fluid are made of resins. In addition, springs are coated.
Lightweight and compact: Their weights are about one third to one fifth those of metal valves. With small interfaces, they facilitate piping work.
Cost reduction

VAN MỘT CHIỀU ASAHI- NHẬT SWING CHECK VALVE[1/2-8inch]

1.000.000 đ

VAN MỘT CHIỀU ASAHI- NHẬT SWING CHECK VALVE[1/2-8inch]
SIZE: 15-200mm

The SWING CHECK VALVE prevents backflow, thus protecting equipment, such as a pump. Being of an swing arm type, the valve gives little resistance to flow. The SWING CHECK VALVE is highly resistant to corrosive chemicals, acid and alkaline, because of its plastic construction. To maintain the SWING CHECK VALVE, only the bonnet lid has to be removed, without taking the body out of pipeline.

VAN BƯỚM ASAHI- NHẬT ROTARY DAMPER[1 1/2-24inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT ROTARY DAMPER[1 1/2-24inch]
SIZE: 40-600mm

DAMPER STYLE is Designed for Flow Control.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 55[2-10inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 55[2-10inch]
SIZE: 50-250mm

Extreme Corrosion Resistance: All of the wetted parts are completely covered with PTFE, which can result in excellent performance against a highly corrosive media.
Improved Cv Value: Thinner disc makes the area of flow passage wider and the Cv value is improved as a result.
Excellent resistibility to high and low temperature.: BUTTERFLY VALVE TYPE 55 can be used continuously at the range from -20℃ to 100℃ (-5°F to 210°F)
Simple Structure for Stem Sealing: Simple structure for stem sealing offers high reliability and also allows for easy maintenance.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57TL[3-12inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57TL
SIZE: 80-300mm


Incorporated Lug Function into the Type57 Butterfly Valve Design
Easy for Maintenance: Easy to draw out fluid No-leakage under full line pressure.
Protection for Over Tightening: Body acts as a protector against over tightening to prevent breakage or deformation of seat.
Plastic Gear Box: Extremely corrosion resistant and easy operation.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57L [3-10inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57L
SIZE: 80-250mm

Incorporated Lug Function into the Type57 Butterfly Valve Design
Easy for Maintenance: Easy to draw out fluid No-leakage under full line pressure.
Protection for Over Tightening: Body acts as a protector against over tightening to prevent breakage or deformation of seat.
Plastic Gear Box: Extremely corrosion resistant and easy operation.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 56D,75D

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 56D,75D

SIZE: 450-600mm

Easy Transformation of Operation Devices: Application of modular design on top flange provides the valve with flexible and easy change of operation types, and from manual to automatic and so on.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 75[18-24inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 75[18-24inch]

SIZE: 450-600mm

Long stem type and chain drive type are available on special request.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57[1 1/2-14inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57[1 1/2-14inch]

SIZE: 400mm

Step Further to All Plastic: TYPE 56 with lever operator butterfly valve which metal parts are reduced as much as possible.
Easy Transformation of Operation Devices: Application of modular design on top flange provides the valve with flexible and easy change of operation types, from lever to gear and from manual to automatic and so on.
Excellent Handling and Safety: Application of newly innovative locking device(patent pend-ing)for lever type gives the valve opening degrees by 19 levels. And also handle lever with locking hole provides one solution against wrong handle operation.
Handle Lever with Flexibility of Mounting Direction: Symmetric design on top flange offers easy change of handle lever mounting direction at working site.

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57[1 1/2-14inch]

1.000.000 đ

VAN BƯỚM ASAHI- NHẬT BUTTERFLY VALVE TYPE 57[1 1/2-14inch]

SIZE: 40-350mm


Excellent Sealing Performance: Sealing performance has been improved due to its specially designed seat "PAT pending".
Lowered Operating Torque: Required operating torque has been reduced by applying specially designed seat.
Protection for Over Tightening of Mating Flange: The valve body acts as a protector against over tightening to avoid breakage or deformation of the seat.
Spherical Design Disc: Spherical design disc provides superior durability and improved Cv value.
Stem Retainer: Stem retainer allows field automation or accessories preventing the stem from being removed.
Newly Developed Plastic Gear Box: Corrosion resistant plastic gear box provides a broader range of applications.

VAN BI ASAHI- NHẬT LAB COCK

1.000.000 đ

VAN BI ASAHI- NHẬT LAB COOK
SIZE:

The LAB COCK is a compact, light weight plastic valve which is highly corrosion-resistant, in durable.

VAN BI 3 NGÃ ASAHI- NHẬT 3-WAY BALL VALVE TYPE 23H[1-1 1/2inch]

1.000.000 đ

VAN BI 3 NGÃ ASAHI- NHẬT 3-WAY BALL VALVE TYPE 23H[1-1 1/2inch]

SIZE: 25-40mm


Horizontal Model: The 3-Way BALL VALVE TYPE 23H is horizontal model(T port).
Same Features as TYPE23: a) Compact and Economic
b) Reversible Flow Direction
c) Equipped ISO Mounting Flange
d) Interchangeable with Ball Valve Type21

VAN BI 3 NGÃ ASAHI- NHẬT 3-WAY BALL VALVE TYPE 23[1/2-4inch]

1.000.000 đ

VAN BI 3 NGÃ ASAHI- NHẬT 3-WAY BALL VALVE TYPE 23[1/2-4inch]

SIZE: 15-100mm


Compact and Economic: The 3-WAY BALL VALVES allows two flow patterns, using one valve. The valve is suitable for a pipeline which requires two ball valves and a tee. That is, the 3-WAY BALL VALVES is economic because it makes piping compact and saves space.
Reversible Flow Direction: The 3-WAY BALL VALVE is based on the Asahi true union ball valve design which can be installed or removed only by tightening or loosening its union nut.
Newly Equipped ISO Mounting Flange: This new feature provides for easier mounting of actuators on valves.
Interchangeable with Ball Valve Type21: The face to face dimensions, as well as the connecting parts, end connectors and union nuts, are the same as the ball valve Type21.
Other Special Features: Double O-ring seal on stem for an added protection. W-L port ball and *Cross port ball are available upon request. Note: Cross port ball is available at the size of 15mm (1/2inch) up to 50mm (2inch). Built-in spanner wrench on the handle for valve disassembly and assembly.

VAN BI ASAHI- NHẬT WATER BV[1/2-2inch]

1.000.000 đ

VAN BI ASAHI- NHẬT WATER BV[1/2-2inch]

SIZE:


Most suitable valve for water: Water BV can be used for water, seawater and therefore have reasonable price. (This valve is not recommended for chemical fruid.)
Easy to Be Automated(No Modification Required): Featuring a new integral molded top flange. The WATER BV can easily be converted from the manual to automatic without replacing the body.
Double-O-ring: The stem uses a double-O-ring, sealing arrangement improving durability sealing performance. The upper O-ring groove is deeper than the lower O-ring groove. Because of this design, the stem would break first at the upper O-ring groove, acting as a back up seal.
Multi Functional Handle: Removing the handle and placing the raised lugs into the carrier allow for easy disassembly of the valve.

VAN BI ASAHI- NHẬT BALL VALVE TYPE 21[1/2-4inch]

1.000.000 đ

VAN BI ASAHI- NHẬT BALL VALVE TYPE 21[1/2-4inch]

SIZE: 15-100mm

Easy to Be Automated (No Madification requir): Featuring a new intregal molded top flange. The BALL VALVE TYPE 21 can easily be converted from the manual to automatic without replacing the body.
Simple Installation on Panel Piping: New bottom stand with an insert hole allows the valve to be secured on bench or panel only by inserting a metallic insert.
Double-O-ring: The stem uses a double-O-ring, sealing arrangement improving durability sealing performance. The upper O-ring groove is deeper than the lower O-ring groove. Because of this design, the stem would break first at the upper O-ring groove, acting as a back up seal.
Multi Functional Handle: Removing the handle and placing the raised lugs into the carrier allow for easy disassembly of the valve. *The handle has another color.(blue, white, yellow)

VAN BI ASAHI- NHẬT COMPACT BALL VALVE TYPE 27

1.000.000 đ

VAN BI ASAHI- NHẬT COMPACT BALL VALVE TYPE 27

SIZE: 13～50mm

New Design: Fully redesigned allows to less handle operation, and small face-to-face dimension.
Compact: With small number of components and light weight, compact design, suitable for installation in a narrow space and ideal for facility piping plants.
Full Bore Design: The spherical valve element allows for a straight flow path and extremely small fluid resistance. (Excellent water characteristics) No risk of difficult handle operation due to thermal expansion or construction.
PTFE Seat: Using PTFE, the seat is highly resistant to corrosion, chemical and abrasion.

Danh mục

VAN THỞ KSPC
VAN & KHỚP NỐI TOZEN
VAN VYC
- VAN AN TOÀN
- BẪY HƠI
- VAN GIẢM ÁP
- VAN PHA TRỘN (MIXING VALVE)
- VAN MỘT CHIỀU
- LỌC Y
- VAN XẢ ĐÁY LÒ HƠI
- VAN PHAO
- BÁO MỨC TỰ ĐỘNG
- KÍNH QUAN SÁT
- ĐIỀU KHIỂN
- VAN CẦU BELLOW SEALED
VAN DẦU-KHÍ-ĐIỆN-HÓA CHẤT
VAN TỰ ĐỘNG
BULONG, GASKET, ĐỒNG HỒ
CẦN XUẤT NHẬP GASSO
- CẤN XUẤT
- ỐNG COMPOSITE
- BREAKAWAYS
- ỐNG CAO SU
THIẾT BỊ PCCC
- VAN PCCC HD FIRE
- VAN PCCC WEFLO
VAN ỐNG NHỰA A-SUNG
- VAN BI
- VAN MÀNG
- VAN BƯỚM
- VAN MỘT CHIỀU
- ỐNG
- PHỤ KIỆN
VAN CÔNG NGHIỆP
- VAN CỬA
- VAN CẦU
- VAN BƯỚM
- VAN BI
- VAN 1 CHIỀU
- LỌC Y
- VAN KIM
- VAN ĐIỀU KHIỂN KHÍ NÉN
- VAN ĐIỀU KHIỂN ĐIỆN
THƯƠNG HIỆU KHÁC