VAN CÔNG NGHIỆP PHÚC MINH - THẾ GIỚI VAN CÔNG NGHIỆP
VAN CÔNG NGHIỆP PHÚC MINH - THẾ GIỚI VAN CÔNG NGHIỆP
HOTLINE: +840902720814
Tìm thấy tất cả những gì bạn cần về van công nghiệp

VAN BƯỚM - DK VALVE Double eccentric butterfly valve

Double eccentric butterfly valve

Double Eccentric Geometry

▪ 1st offset :

The first offset is achieved by locating the shaft downstream of the centerline of the seat. This allows for a totally unobstructed 360 degree sealing surface.

▪ 2nd offset :

The second offset locates the shafts off-center of the vertical axis of the seat.
The combination of these two offsets creates a cam effect as the disc swings into and out of the seat. The disc lifts quickly out of the seat in the first few degrees of travel
and does not contact the seat again until it is nearly closed. There are no wear points between the seat and disc, while operating torques are reduced and seat life is extended.

Khối lượng: 20 kg
32.900.000 đ
Số lượng

Standard Specifications

  • DESIGN

    ▪ API 609 Cat.B
    ▪ ASME B 16.34

    FACE-TO-FACE

    ▪ API 609 Cat. B
    ▪ Wafer and Lugged
    ▪ Double flange Short/Long

    FLANGE STANDARD

    ▪ ASME B 16.5/16.47
    ▪ BS 4504 / EN 1092-1
    ▪ JIS B2220
    ▪ Others on request

    PRESSURE RATING

    ▪ ASME B 16.34
    ▪ Class 150/300

  • NOMINAL DIAMETER

    ▪ 2” to 144”
    ▪ DN 50 to 3600

    OTHER OPTIONS

    ▪ Fire safe design
    ▪ Anti-static device
    ▪ Cryogenic design
    ▪ Others on request

    TESTING

    ▪ API 598
    ▪ ASME B 16.104 / FCI 70-2
    ▪ ISO 5208

     

     
     
     

Applicable Materials

Carbon Steel A105, A216 WCB / WCC / WC6 / WC9
Low Temp. Carbon Steel A350 LF2, A352 LCB / LCC
Austenitic Stainless Steel A182 F304 / F316, A351 CF8 / CF8M / CF3 / CF3M
Duplex Stainless Steel A182 F51 / F53 / F55, A995 4A / 5A / 6A
Special Alloy Inconel® 625(UNS N06625), 254SMO®(UNS S31254)
Monel® K400 / 500 (UNS N04400 / N05500)

     

 

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây